/* =============================================================================================================
   LOUEI 3D PRINT · skin-rails.css · THE LEFT AND RIGHT RAILS AS MACHINED PLATES (final v2, round 3, 2026-10-06)

   The owner (2026-10-05): the rails' design is very good but reads two-dimensional - treat them exactly like the
   machined-plate buttons (story.css THE MACHINED PLATES, buttons/BUTTONS_FINAL.md). So every plate on both rails is now a
   sibling of those buttons: a chamfered chrome bezel (rim in tones, facets lit from the top right), a 1px dark seam, a
   brushed face set into it, screws seated in counterbores, an engraved label and a cast shadow on the rail. The rails'
   own layout, materials and colours stay: light steel plates, copper for the asks, black anodised HOME. The page you are
   on is pressed in, with a copper face. HOME, UPLOAD and SHOW US also take the buttons' voice: tracked condensed caps.
   (Chosen from three prototypes - A "machined twins", B "tray and keys", C "quiet luxury" - built on A, with B's type
   for the three asks; see check_20261005/rails/final/APPLY_NOTE.md.)

   COST RULES (the film must never catch): every rail control is its own composited layer (will-change: transform),
   so its paint never touches the stage layer again. Hover = transform (a 1 px lift) + the opacity of a pre-painted glint
   layer (will-change: opacity) - compositor only, no raster. Pressed / focus / current switch instantly (no transition)
   and repaint only the plate's own small layer. No filter, no backdrop-filter, no blend mode anywhere.
   KEEP: the grain image only on children that no hover restyles (Blink repaints a restyled element whose paint holds
   a url() image); contain: paint on both rails (section 6).

   PALETTES: every colour is #rrggbb or rgb()/rgba(), so tools/make_palettes.py recolours this sheet like the other ten
   once "skin-rails.css" is in its SHEETS. The grain (assets/tex/rail-brush.png, made by tools/make_grain.py) is
   neutral alpha: nothing to recolour.
   LOAD ORDER: the LAST stylesheet (after story.css: it must beat story.css's FDM card hover). The plates are drawn inside
   the site's own boxes.
   ROUND 3 (2026-10-06, the owner: "the SERVICES menu is the most important part of the site - each plate is so small the
   words can't be made out"): the left rail is re-balanced so SERVICES gets the room - ten 53 px rows (plates drawn 48 px,
   5 px grooves) instead of 38.6 px rows with 0.4 px gaps, labels 18 px instead of 14.5 px, EXPLORE in two columns, HOME
   and UPLOAD a little slimmer (section 8). THIS SHEET NOW GOES WITH A SHELL MARKUP PATCH (final2/site/index_patch.json,
   applied by final2/tools/apply_patch.py): the plates' inline top / height (and EXPLORE's left / width) and one rename
   (Wholesale Production -> Bulk 3D Printing, on the rail and in the phone nav belt). Deploy both together.
   PHONE: everything is inside (min-width: 821px); mobile.css hides the rails below that, so phones are unchanged (the
   rename also shows in the phone nav belt: checked at 390 px, the name fits its 190 px plate).
   ============================================================================================================= */
@media (min-width: 821px) {

/* --------------------------------------------------------------------------------------------- 0. tokens
   v2 (2026-10-06, the owner: "in the LEFT menu the words are not readable"): --dp is ONE DEVICE PIXEL in stage px. The
   stage is scaled to the window (s = min(vw/1586, vh/992): 0.66 at 1366x657, 0.77 at 1366x768, 1.09 at 1920x1080, 1.32 at
   3440x1307), so a 1 px engrave offset was 0.66 device px on a small monitor - a soft half-pixel fringe on every stroke.
   1/s is approximated in viewport units (good to +-6 % from 1366x657 to 3440x1440), so the light under-cut under the
   words is one crisp device pixel at every window size. */
.side.left, .side.right { --dp: clamp(.75px, max(2.49px - .149vh, 2.49px - .0932vw), 1.5px); }
.side.left .menu .plate, .side.left .plate-dark.home, .side.left .plate-copper.upload,
.side.right .card, .side.right .cta-copper {
  --d: calc(var(--c) * .7071);
  --mt-seam: #0d0a07;
  --mt-ring: #4a2810;
  --mt-none: linear-gradient(rgba(0,0,0,0), rgba(0,0,0,0));
  --mt-press: var(--mt-none);
  --fr: var(--in) var(--in) / calc(100% - var(--in) * 2) calc(100% - var(--in) * 2) no-repeat;
  /* cast shadows, light from the top right: on the rail, lifted, pressed */
  --mt-sh-rest:  -1px 1px 1px rgba(26,16,8,.36), -1px 3px 4px -1px rgba(40,26,12,.30), -2px 9px 13px -7px rgba(40,26,12,.42);
  --mt-sh-lift:  -1px 3px 4px -1px rgba(26,16,8,.22), -2px 8px 12px -5px rgba(40,26,12,.34);
  --mt-sh-press: 0 0 1px rgba(26,16,8,.50), -1px 1px 2px -1px rgba(40,26,12,.34);
  /* the face pressed in: the bezel wall's shadow falls on its top */
  --mt-sunk: linear-gradient(180deg, rgba(10,4,0,.34), rgba(10,4,0,.12) 3px, rgba(10,4,0,.05) 55%, rgba(255,230,200,.04));

  /* chrome bezel, 2 px rim (the small plates) - the same tones and facets as .mp-sm */
  --bz2:
    linear-gradient(180deg, rgba(0,0,0,0) 30%, rgba(0,0,0,.24)) 0 0 / 2px 100% no-repeat,
    linear-gradient(180deg, rgba(0,0,0,0) 30%, rgba(0,0,0,.24)) 100% 0 / 2px 100% no-repeat,
    linear-gradient(135deg, rgba(0,0,0,0) var(--d), #85817a 0 calc(var(--d) + 1px), #e9e5de 0 calc(var(--d) + 2px), rgba(0,0,0,0) 0) left top / 18px 18px no-repeat,
    linear-gradient(225deg, rgba(0,0,0,0) var(--d), #97938b 0 calc(var(--d) + 1px), #ffffff 0 calc(var(--d) + 2px), rgba(0,0,0,0) 0) right top / 18px 18px no-repeat,
    linear-gradient(315deg, rgba(0,0,0,0) var(--d), #221f1b 0 calc(var(--d) + 1px), #8a867e 0 calc(var(--d) + 2px), rgba(0,0,0,0) 0) right bottom / 18px 18px no-repeat,
    linear-gradient(45deg,  rgba(0,0,0,0) var(--d), #221f1b 0 calc(var(--d) + 1px), #5f5b54 0 calc(var(--d) + 2px), rgba(0,0,0,0) 0) left bottom / 18px 18px no-repeat,
    linear-gradient(180deg, #8d8981 0 1px, #f7f4ef 0 2px, rgba(0,0,0,0) 0) 0 0 / 100% 2px no-repeat,
    linear-gradient(0deg,   #1f1c19 0 1px, #6d6962 0 2px, rgba(0,0,0,0) 0) 0 100% / 100% 2px no-repeat,
    linear-gradient(90deg,  #5a564f 0 1px, #c9c4bc 0 2px, rgba(0,0,0,0) 0) 0 0 / 2px 100% no-repeat,
    linear-gradient(270deg, #75716a 0 1px, #f1eee9 0 2px, rgba(0,0,0,0) 0) 100% 0 / 2px 100% no-repeat;
  /* chrome bezel, 3 px rim (the big plates) - the same tones and facets as .mp */
  --bz3:
    linear-gradient(180deg, rgba(0,0,0,0) 35%, rgba(0,0,0,.26)) 0 0 / 3px 100% no-repeat,
    linear-gradient(180deg, rgba(0,0,0,0) 35%, rgba(0,0,0,.26)) 100% 0 / 3px 100% no-repeat,
    linear-gradient(90deg, rgba(0,0,0,.10), rgba(0,0,0,0) 55%) 0 0 / 100% 3px no-repeat,
    linear-gradient(135deg, rgba(0,0,0,0) var(--d), #85817a 0 calc(var(--d) + 1px), #e9e5de 0 calc(var(--d) + 2px), #b3aea6 0 calc(var(--d) + 3px), rgba(0,0,0,0) 0) left top / 18px 18px no-repeat,
    linear-gradient(225deg, rgba(0,0,0,0) var(--d), #97938b 0 calc(var(--d) + 1px), #ffffff 0 calc(var(--d) + 2px), #d8d4cd 0 calc(var(--d) + 3px), rgba(0,0,0,0) 0) right top / 18px 18px no-repeat,
    linear-gradient(315deg, rgba(0,0,0,0) var(--d), #221f1b 0 calc(var(--d) + 1px), #8a867e 0 calc(var(--d) + 2px), #5e5a53 0 calc(var(--d) + 3px), rgba(0,0,0,0) 0) right bottom / 18px 18px no-repeat,
    linear-gradient(45deg,  rgba(0,0,0,0) var(--d), #221f1b 0 calc(var(--d) + 1px), #5f5b54 0 calc(var(--d) + 2px), #423f3a 0 calc(var(--d) + 3px), rgba(0,0,0,0) 0) left bottom / 18px 18px no-repeat,
    linear-gradient(180deg, #8d8981 0 1px, #f7f4ef 0 2px, #c7c2ba 0 3px, rgba(0,0,0,0) 0) 0 0 / 100% 3px no-repeat,
    linear-gradient(0deg,   #1f1c19 0 1px, #6d6962 0 2px, #4b4842 0 3px, rgba(0,0,0,0) 0) 0 100% / 100% 3px no-repeat,
    linear-gradient(90deg,  #5a564f 0 1px, #c9c4bc 0 2px, #928e86 0 3px, rgba(0,0,0,0) 0) 0 0 / 3px 100% no-repeat,
    linear-gradient(270deg, #75716a 0 1px, #f1eee9 0 2px, #c1bcb4 0 3px, rgba(0,0,0,0) 0) 100% 0 / 3px 100% no-repeat;
  /* the seam keeps the face's own chamfer at the four corners */
  --seamc:
    linear-gradient(135deg, #0d0a07 calc(var(--d) + var(--in)), rgba(0,0,0,0) 0) left top / 18px 18px no-repeat,
    linear-gradient(225deg, #0d0a07 calc(var(--d) + var(--in)), rgba(0,0,0,0) 0) right top / 18px 18px no-repeat,
    linear-gradient(315deg, #0d0a07 calc(var(--d) + var(--in)), rgba(0,0,0,0) 0) right bottom / 18px 18px no-repeat,
    linear-gradient(45deg,  #0d0a07 calc(var(--d) + var(--in)), rgba(0,0,0,0) 0) left bottom / 18px 18px no-repeat;

  /* a screw seated in a counterbore, on an 8 px tile, lit from the top right: glint, dome, the shadow the dome drops in
     its bore, the bore's lit lower-left wall, the bore's dark upper-right wall. Material colours: --rk0..4, --rl, --rd */
  --rk0: #f4f2ee; --rk1: #cfccc6; --rk2: #95918a; --rk3: #4d4a45; --rk4: rgba(40,38,35,0);
  --rl: rgba(255,255,255,.62); --rd: rgba(0,0,0,.46); --rs: rgba(0,0,0,.5);
  --rv1:
    radial-gradient(circle 1.1px at 5px 2.9px, rgba(255,255,255,.95), rgba(255,255,255,0)) var(--p1) / 8px 8px no-repeat,
    radial-gradient(circle 2.8px at 4.25px 3.75px, var(--rk0) 0, var(--rk1) .8px, var(--rk2) 1.7px, var(--rk3) 2.45px, var(--rk4) 2.8px) var(--p1) / 8px 8px no-repeat,
    radial-gradient(circle 3.2px at 3.55px 4.5px, var(--rs) 2.3px, rgba(0,0,0,0) 3.2px) var(--p1) / 8px 8px no-repeat,
    radial-gradient(circle 4px at 3.6px 4.4px, rgba(0,0,0,0) 3.05px, var(--rl) 3.35px, rgba(0,0,0,0) 3.9px) var(--p1) / 8px 8px no-repeat,
    radial-gradient(circle 4px at 4.35px 3.65px, rgba(0,0,0,0) 2.75px, var(--rd) 3.1px, rgba(0,0,0,.16) 3.6px, rgba(0,0,0,0) 3.95px) var(--p1) / 8px 8px no-repeat;
  --rv2:
    radial-gradient(circle 1.1px at 5px 2.9px, rgba(255,255,255,.95), rgba(255,255,255,0)) var(--p2) / 8px 8px no-repeat,
    radial-gradient(circle 2.8px at 4.25px 3.75px, var(--rk0) 0, var(--rk1) .8px, var(--rk2) 1.7px, var(--rk3) 2.45px, var(--rk4) 2.8px) var(--p2) / 8px 8px no-repeat,
    radial-gradient(circle 3.2px at 3.55px 4.5px, var(--rs) 2.3px, rgba(0,0,0,0) 3.2px) var(--p2) / 8px 8px no-repeat,
    radial-gradient(circle 4px at 3.6px 4.4px, rgba(0,0,0,0) 3.05px, var(--rl) 3.35px, rgba(0,0,0,0) 3.9px) var(--p2) / 8px 8px no-repeat,
    radial-gradient(circle 4px at 4.35px 3.65px, rgba(0,0,0,0) 2.75px, var(--rd) 3.1px, rgba(0,0,0,.16) 3.6px, rgba(0,0,0,0) 3.95px) var(--p2) / 8px 8px no-repeat;
  --rv3:
    radial-gradient(circle 1.1px at 5px 2.9px, rgba(255,255,255,.95), rgba(255,255,255,0)) var(--p3) / 8px 8px no-repeat,
    radial-gradient(circle 2.8px at 4.25px 3.75px, var(--rk0) 0, var(--rk1) .8px, var(--rk2) 1.7px, var(--rk3) 2.45px, var(--rk4) 2.8px) var(--p3) / 8px 8px no-repeat,
    radial-gradient(circle 3.2px at 3.55px 4.5px, var(--rs) 2.3px, rgba(0,0,0,0) 3.2px) var(--p3) / 8px 8px no-repeat,
    radial-gradient(circle 4px at 3.6px 4.4px, rgba(0,0,0,0) 3.05px, var(--rl) 3.35px, rgba(0,0,0,0) 3.9px) var(--p3) / 8px 8px no-repeat,
    radial-gradient(circle 4px at 4.35px 3.65px, rgba(0,0,0,0) 2.75px, var(--rd) 3.1px, rgba(0,0,0,.16) 3.6px, rgba(0,0,0,0) 3.95px) var(--p3) / 8px 8px no-repeat;
  --rv4:
    radial-gradient(circle 1.1px at 5px 2.9px, rgba(255,255,255,.95), rgba(255,255,255,0)) var(--p4) / 8px 8px no-repeat,
    radial-gradient(circle 2.8px at 4.25px 3.75px, var(--rk0) 0, var(--rk1) .8px, var(--rk2) 1.7px, var(--rk3) 2.45px, var(--rk4) 2.8px) var(--p4) / 8px 8px no-repeat,
    radial-gradient(circle 3.2px at 3.55px 4.5px, var(--rs) 2.3px, rgba(0,0,0,0) 3.2px) var(--p4) / 8px 8px no-repeat,
    radial-gradient(circle 4px at 3.6px 4.4px, rgba(0,0,0,0) 3.05px, var(--rl) 3.35px, rgba(0,0,0,0) 3.9px) var(--p4) / 8px 8px no-repeat,
    radial-gradient(circle 4px at 4.35px 3.65px, rgba(0,0,0,0) 2.75px, var(--rd) 3.1px, rgba(0,0,0,.16) 3.6px, rgba(0,0,0,0) 3.95px) var(--p4) / 8px 8px no-repeat;
  --p1: left calc(var(--in) + 3px) top calc(var(--in) + 3px);
  --p2: right calc(var(--in) + 3px) top calc(var(--in) + 3px);
  --p3: left calc(var(--in) + 3px) bottom calc(var(--in) + 3px);
  --p4: right calc(var(--in) + 3px) bottom calc(var(--in) + 3px);

  /* the steel face (the rail's own light steel, per plate): lip, specular band in the top third, lower shade, the
     light falling off to the left, then the grain and the base (set per control) */
  --lip:
    linear-gradient(rgba(255,255,255,.56), rgba(255,255,255,.56)) var(--in) var(--in) / calc(100% - var(--in) * 2) 1px no-repeat,
    linear-gradient(rgba(0,0,0,.26), rgba(0,0,0,.26)) var(--in) calc(100% - var(--in)) / calc(100% - var(--in) * 2) 1px no-repeat,
    linear-gradient(rgba(0,0,0,.14), rgba(0,0,0,.14)) var(--in) var(--in) / 1px calc(100% - var(--in) * 2) no-repeat,
    linear-gradient(rgba(255,255,255,.28), rgba(255,255,255,.28)) calc(100% - var(--in)) var(--in) / 1px calc(100% - var(--in) * 2) no-repeat;
  /* v2: the light still falls off to the left and the lower edge still turns away, but both stay out of the label zone:
     the falloff ends at 30 % of the width (the icon's zone; the words start at 24-26 %), the lower shade starts at 64 %
     of the height (under the words). v1 had 14 % black at the first letter and 9 % under the second line. */
  --shade:
    linear-gradient(180deg, rgba(255,255,255,0) 4%, rgba(255,255,255,.26) 14%, rgba(255,255,255,.08) 24%, rgba(255,255,255,0) 34%) var(--fr),
    linear-gradient(180deg, rgba(0,0,0,0) 64%, rgba(0,0,0,.12) 100%) var(--fr),
    linear-gradient(90deg, rgba(0,0,0,.20) 0%, rgba(0,0,0,.09) 15%, rgba(0,0,0,0) 30%, rgba(0,0,0,0) 84%, rgba(255,255,255,.08) 100%) var(--fr);
  --base: linear-gradient(180deg, var(--t0), var(--t1)) var(--fr);
  --t0: #d6d4d1; --t1: #c4c2bf;
  /* v2: true ink (#12100c) with ONE crisp light under-cut, one device pixel (--dp); v1's second, dark top shadow and its
     sub-pixel offsets smeared a light/dark fringe round every stroke at 0.66-0.77 scale (9-19 % of the label box) */
  --ink-shadow: 0 var(--dp) 0 rgba(255,255,255,.55);

  /* the hover layer: a glint runs along the lit edges (top rim, the top-right facet, the right rim), the face catches a
     little more light at the top right, and the shadow deepens under the lift. Pre-painted; only its opacity changes. */
  --glint:
    linear-gradient(90deg, rgba(255,255,255,0), rgba(255,255,255,.5) 45%, rgba(255,255,255,.95)) var(--c) 1px / calc(100% - var(--c) * 2) 1px no-repeat,
    linear-gradient(225deg, rgba(255,255,255,0) var(--d), rgba(255,255,255,.95) 0 calc(var(--d) + 2px), rgba(255,255,255,0) 0) right top / 18px 18px no-repeat,
    linear-gradient(180deg, rgba(255,255,255,.6), rgba(255,255,255,0) 80%) calc(100% - 1px) var(--c) / 1px calc(100% - var(--c) * 2) no-repeat,
    radial-gradient(70% 150% at 90% 0, rgba(255,255,255,.22), rgba(255,255,255,0) 72%) var(--fr),
    linear-gradient(180deg, rgba(255,255,255,.10), rgba(255,255,255,0) 45%) var(--fr);
}

/* materials (variables only; each control's background below is the same stack) */
.side.right .cta-copper, .side.left .plate-copper.upload,
.side.left .menu .plate.is-current, .side.right .card:has(.card-link.is-current) {   /* copper (the asks, the page you are on) */
  --calm: var(--mt-none);
  --rk0: #e2ab7a; --rk1: #c3834b; --rk2: #97602f; --rk3: #5e3514; --rk4: rgba(60,30,8,0);
  --rl: rgba(255,214,170,.42); --rd: rgba(24,9,0,.55); --rs: rgba(24,9,0,.55);
  --lip:
    linear-gradient(rgba(255,226,192,.42), rgba(255,226,192,.42)) var(--in) var(--in) / calc(100% - var(--in) * 2) 1px no-repeat,
    linear-gradient(rgba(28,10,0,.42), rgba(28,10,0,.42)) var(--in) calc(100% - var(--in)) / calc(100% - var(--in) * 2) 1px no-repeat,
    linear-gradient(rgba(28,10,0,.18), rgba(28,10,0,.18)) var(--in) var(--in) / 1px calc(100% - var(--in) * 2) no-repeat,
    linear-gradient(rgba(255,221,182,.16), rgba(255,221,182,.16)) calc(100% - var(--in)) var(--in) / 1px calc(100% - var(--in) * 2) no-repeat;
  --shade:
    linear-gradient(180deg, rgba(255,247,240,0) 6%, rgba(255,247,240,.11) 14%, rgba(255,247,240,.03) 22%, rgba(255,247,240,0) 30%) var(--fr),
    radial-gradient(56% 60% at 20% 16%, rgba(255,210,164,.08), rgba(255,210,164,0) 72%) var(--fr),
    radial-gradient(52% 120% at 84% 82%, rgba(34,12,0,.12), rgba(34,12,0,0) 70%) var(--fr),
    linear-gradient(90deg, rgba(40,16,2,.10), rgba(40,16,2,0) 28%, rgba(255,214,170,.04) 66%, rgba(40,16,2,.05)) var(--fr);
  --base: linear-gradient(180deg, #8f5d2d 0, #7d5026 18%, #734921 50%, #6b431e 78%, #5f3b1a 100%) var(--fr);   /* the film plates' copper, one step deeper: the palettes keep lightness, not luminance, so the cream words hold >= 4.4:1 even in Safety Yellow */
  --ink-shadow: 0 calc(var(--dp) * -1) 0 rgba(52,22,4,.55);   /* v2: one device pixel of shade above the cream, nothing below */
  /* the copper asks' hover: the rim warms (the machined plate's held hover), plus the glint */
  --warm:
    linear-gradient(135deg, rgba(0,0,0,0) var(--d), rgba(227,154,79,.55) 0 calc(var(--d) + 3px), rgba(0,0,0,0) 0) left top / 18px 18px no-repeat,
    linear-gradient(315deg, rgba(0,0,0,0) var(--d), rgba(227,154,79,.55) 0 calc(var(--d) + 3px), rgba(0,0,0,0) 0) right bottom / 18px 18px no-repeat,
    linear-gradient(45deg,  rgba(0,0,0,0) var(--d), rgba(227,154,79,.55) 0 calc(var(--d) + 3px), rgba(0,0,0,0) 0) left bottom / 18px 18px no-repeat,
    linear-gradient(rgba(227,154,79,.5), rgba(227,154,79,.5)) var(--c) 0 / calc(100% - var(--c) * 2) 3px no-repeat,
    linear-gradient(rgba(227,154,79,.5), rgba(227,154,79,.5)) var(--c) 100% / calc(100% - var(--c) * 2) 3px no-repeat,
    linear-gradient(rgba(227,154,79,.5), rgba(227,154,79,.5)) 0 var(--c) / 3px calc(100% - var(--c) * 2) no-repeat,
    linear-gradient(rgba(227,154,79,.5), rgba(227,154,79,.5)) 100% var(--c) / 3px calc(100% - var(--c) * 2) no-repeat;
}

/* ------------------------------------------------------------------- 1. LEFT RAIL: SERVICES + EXPLORE plates
   The hit box stays the site's own (inline top/height, so the plates still tile the tray with no dead rows); the part
   drawn inside it is 2.6 px shorter (1 px clear at the top, 1.6 px at the bottom), so every plate stands on its own
   with a 3 px groove of tray floor around it for its shadow: 36 / 35 px plates on the 39 / 38 px rows. Explore: 34 px
   plates on its 37 px rows. The label becomes an in-flow flex item, so its pseudo-elements can carry the plate.
   Layers inside each plate: ::after cast shadow (z -2), span::before bezel + face + screws (z -1), the label (flow),
   ::before the hover glint, the icon, span::after the focus ring.
   WHY THE PLATE IS DRAWN ON THE LABEL'S ::before: a hover restyles the link (its transform) and, through the site's own
   :hover rules, its ::after; Blink re-resolves a restyled element's url() image and repaints it (measured: every plate the
   pointer crossed repainted). The label itself is never restyled by a hover, so the layer carrying the grain image never
   repaints; the link's own pseudo-elements hold only gradients and shadows, which compare equal and paint nothing. */
.side.left .menu .plate {
  --c: 6px; --in: 3px; --vt: 2.5px; --vb: 2.5px; --vl: 0px; --vr: 0px; --mt-sh: var(--mt-sh-rest);
  --p1: right calc(var(--in) + 3px) top calc(var(--in) + 3px);
  --p2: right calc(var(--in) + 3px) bottom calc(var(--in) + 3px);
  display: flex; align-items: center; box-sizing: border-box; padding: 0 16px 0 43px;
  background: none; box-shadow: none; border-radius: 0; clip-path: none; filter: none; outline: none;
  will-change: transform; transform: translateY(0);
  transition: transform .18s cubic-bezier(.2,.8,.2,1);
}
/* round 3: EXPLORE is two columns of small plates; each hit box keeps a 2.5 px groove on every side of its drawn plate */
/* (one screw, at the right, like the SERVICES plates' column of screws: a second one at the left crowded the words) */
.side.left .menu.explore .plate { --c: 4px; --vt: 2px; --vb: 2px; --vl: 2.5px; --vr: 2.5px; padding: 0 17px 0 12px;
  --rv1: var(--mt-none); --p2: right calc(var(--vr) + var(--in) + 2px) center; }
.side.left .menu .plate:is(*, .is-current:hover, .is-current:active)::after {   /* the cast shadow, under the drawn plate only.
     It is ::after because the site's own :hover rules restyle ::after (styles.css, skin-current.css); a shadow has no image to
     re-resolve, so that restyle paints nothing. The :is() outranks skin-current's state rules. */
  content: ""; position: absolute; z-index: -2; pointer-events: none;
  left: var(--vl); right: var(--vr); top: var(--vt); bottom: var(--vb); width: auto; height: auto; inset: var(--vt) var(--vr) var(--vb) var(--vl);
  border-radius: calc(var(--c) * 1.7); background: none; filter: none; transition: none; clip-path: none;
  box-shadow: var(--mt-sh);
}
.side.left .menu .plate > span::before {   /* bezel + face + screws */
  content: ""; position: absolute; z-index: -1; pointer-events: none;
  left: var(--vl); right: var(--vr); top: var(--vt); bottom: var(--vb); width: auto; height: auto; inset: var(--vt) var(--vr) var(--vb) var(--vl);
  border-radius: 0; box-shadow: none; filter: none; transition: none;
  clip-path: polygon(var(--c) 0, calc(100% - var(--c)) 0, 100% var(--c), 100% calc(100% - var(--c)),
                     calc(100% - var(--c)) 100%, var(--c) 100%, 0 calc(100% - var(--c)), 0 var(--c));
  background:
    var(--mt-press) var(--fr),
    var(--bz2), var(--seamc), var(--rv1), var(--rv2), var(--lip), var(--shade), var(--calm, var(--mt-none)),
    url("assets/tex/rail-brush.png?h=f79252a0") var(--gx, 0px) var(--gy, 0px) / 256px 128px repeat,
    var(--base), #0d0a07;
}
.side.left .menu .plate > span {         /* the label: in flow, engraved */
  position: static; transform: none; z-index: auto; left: auto; top: auto;
  flex: 0 1 auto; min-width: 0; margin: .5px 0 0;
  text-shadow: var(--ink-shadow);
  transition: none;
}
.side.left .menu.explore .plate > span { margin-top: 0; }
.side.left .menu .plate::before {        /* the hover glint + the deeper shadow of the lift */
  content: ""; position: absolute; pointer-events: none; z-index: auto;
  left: var(--vl); right: var(--vr); top: var(--vt); bottom: var(--vb); width: auto; height: auto;
  border-radius: calc(var(--c) * 1.7); clip-path: none; filter: none;
  background: var(--glint); box-shadow: var(--mt-sh-lift);
  opacity: 0; will-change: opacity; transition: opacity .18s linear;
}
.side.left .menu .plate > span::after {  /* keyboard focus: a 2 px ring cut to the chamfer, 2 px clear of the bezel */
  content: ""; position: absolute; pointer-events: none;
  left: calc(var(--vl) - 4px); right: calc(var(--vr) - 4px); top: calc(var(--vt) - 4px); bottom: calc(var(--vb) - 4px);
  --o: calc(var(--c) + 2.34px); --i: calc(var(--c) + 3.17px);
  clip-path: polygon(evenodd,
    var(--o) 0, calc(100% - var(--o)) 0, 100% var(--o), 100% calc(100% - var(--o)), calc(100% - var(--o)) 100%, var(--o) 100%, 0 calc(100% - var(--o)), 0 var(--o), var(--o) 0,
    var(--i) 2px, calc(100% - var(--i)) 2px, calc(100% - 2px) var(--i), calc(100% - 2px) calc(100% - var(--i)), calc(100% - var(--i)) calc(100% - 2px), var(--i) calc(100% - 2px), 2px calc(100% - var(--i)), 2px var(--i), var(--i) 2px,
    var(--o) 0);
  background: var(--mt-ring); opacity: 0;
}
.side.left .menu .plate > .ic-v { color: #191610; filter: none; z-index: auto; }
/* each plate its own slice of the tray's light, and its own patch of grain.
   v2: the tray's fall of light is kept but halved (row 1 #e2e1df -> row 10 #c3c2c0 at the top of the face; v1 ran to
   #a2a09c, under 5.4:1 for the two-line names), and --calm lays the plate's own mid tone at 72 % over the grain across
   the label zone (fading in over the icon's right edge, out before the screws), so the brush stays on the metal round
   the words and off the letters. */
.side.left .menu.services .plate:nth-child(1)  { --t0: #e2e1df; --t1: #d6d5d3; --gy: -7px; --gx: 0px;
  --calm: linear-gradient(90deg, rgba(220,219,217,0) 16%, rgba(220,219,217,0.72) 22%, rgba(220,219,217,0.72) 91%, rgba(220,219,217,0) 96%) var(--fr); }
.side.left .menu.services .plate:nth-child(2)  { --t0: #dfdedc; --t1: #d2d1cf; --gy: -46px; --gx: -91px;
  --calm: linear-gradient(90deg, rgba(216,215,213,0) 16%, rgba(216,215,213,0.72) 22%, rgba(216,215,213,0.72) 91%, rgba(216,215,213,0) 96%) var(--fr); }
.side.left .menu.services .plate:nth-child(3)  { --t0: #dbdad8; --t1: #cecdcb; --gy: -84px; --gx: -37px;
  --calm: linear-gradient(90deg, rgba(213,212,210,0) 16%, rgba(213,212,210,0.72) 22%, rgba(213,212,210,0.72) 91%, rgba(213,212,210,0) 96%) var(--fr); }
.side.left .menu.services .plate:nth-child(4)  { --t0: #d8d7d5; --t1: #cac9c7; --gy: -123px; --gx: -150px;
  --calm: linear-gradient(90deg, rgba(209,208,206,0) 16%, rgba(209,208,206,0.72) 22%, rgba(209,208,206,0.72) 91%, rgba(209,208,206,0) 96%) var(--fr); }
.side.left .menu.services .plate:nth-child(5)  { --t0: #d4d3d1; --t1: #c6c5c3; --gy: -34px; --gx: -12px;
  --calm: linear-gradient(90deg, rgba(205,204,202,0) 16%, rgba(205,204,202,0.72) 22%, rgba(205,204,202,0.72) 91%, rgba(205,204,202,0) 96%) var(--fr); }
.side.left .menu.services .plate:nth-child(6)  { --t0: #d1d0ce; --t1: #c3c2c0; --gy: -73px; --gx: -201px;
  --calm: linear-gradient(90deg, rgba(202,201,199,0) 16%, rgba(202,201,199,0.72) 22%, rgba(202,201,199,0.72) 91%, rgba(202,201,199,0) 96%) var(--fr); }
.side.left .menu.services .plate:nth-child(7)  { --t0: #cdccca; --t1: #bfbebc; --gy: -111px; --gx: -66px;
  --calm: linear-gradient(90deg, rgba(198,197,195,0) 16%, rgba(198,197,195,0.72) 22%, rgba(198,197,195,0.72) 91%, rgba(198,197,195,0) 96%) var(--fr); }
.side.left .menu.services .plate:nth-child(8)  { --t0: #cac9c7; --t1: #bbbab8; --gy: -22px; --gx: -129px;
  --calm: linear-gradient(90deg, rgba(194,193,191,0) 16%, rgba(194,193,191,0.72) 22%, rgba(194,193,191,0.72) 91%, rgba(194,193,191,0) 96%) var(--fr); }
.side.left .menu.services .plate:nth-child(9)  { --t0: #c6c5c3; --t1: #b7b6b4; --gy: -61px; --gx: -170px;
  --calm: linear-gradient(90deg, rgba(191,190,188,0) 16%, rgba(191,190,188,0.72) 22%, rgba(191,190,188,0.72) 91%, rgba(191,190,188,0) 96%) var(--fr); }
.side.left .menu.services .plate:nth-child(10) { --t0: #c3c2c0; --t1: #b3b2b0; --gy: -99px; --gx: -25px;
  --calm: linear-gradient(90deg, rgba(187,186,184,0) 16%, rgba(187,186,184,0.72) 22%, rgba(187,186,184,0.72) 91%, rgba(187,186,184,0) 96%) var(--fr); }
/* explore: the well's steel, a step darker than the SERVICES plates above it and darker down the rows (this replaces
   the filter: brightness steps); v2 lifts it from L* 56-62 under the words to L* 76-80 */
.side.left .menu.explore .plate { --gy: -40px; }
.side.left .menu.explore .plate:nth-child(1) { --t0: #dbdad8; --t1: #cfcecc; --gy: -40px;
  --calm: linear-gradient(90deg, rgba(213,212,210,0) 3%, rgba(213,212,210,0.8) 8%, rgba(213,212,210,0.8) 84%, rgba(213,212,210,0) 90%) var(--fr); }
.side.left .menu.explore .plate:nth-child(2) { --t0: #dad9d7; --t1: #cecdcb; --gx: -80px; --gy: -77px;
  --calm: linear-gradient(90deg, rgba(212,211,209,0) 3%, rgba(212,211,209,0.8) 8%, rgba(212,211,209,0.8) 84%, rgba(212,211,209,0) 90%) var(--fr); }
.side.left .menu.explore .plate:nth-child(3) { --t0: #d8d7d5; --t1: #cccbc9; --gx: -160px; --gy: -14px;
  --calm: linear-gradient(90deg, rgba(210,209,207,0) 3%, rgba(210,209,207,0.8) 8%, rgba(210,209,207,0.8) 84%, rgba(210,209,207,0) 90%) var(--fr); }
.side.left .menu.explore .plate:nth-child(4) { --t0: #d7d6d4; --t1: #cbcac8; --gx: -40px; --gy: -101px;
  --calm: linear-gradient(90deg, rgba(209,208,206,0) 3%, rgba(209,208,206,0.8) 8%, rgba(209,208,206,0.8) 84%, rgba(209,208,206,0) 90%) var(--fr); }
.side.left .menu.explore .plate:nth-child(5) { --t0: #d5d4d2; --t1: #c9c8c6; --gx: -120px; --gy: -60px;
  --calm: linear-gradient(90deg, rgba(207,206,204,0) 2%, rgba(207,206,204,0.8) 5%, rgba(207,206,204,0.8) 91%, rgba(207,206,204,0) 95%) var(--fr); }
/* round 3: on the 27 px keys the words fill the face's height, so the lower shade and the band stay at the rims */
.side.left .menu.explore .plate {
  --shade:
    linear-gradient(180deg, rgba(255,255,255,0) 2%, rgba(255,255,255,.22) 9%, rgba(255,255,255,0) 18%) var(--fr),
    linear-gradient(180deg, rgba(0,0,0,0) 82%, rgba(0,0,0,.10) 100%) var(--fr),
    linear-gradient(90deg, rgba(0,0,0,.12) 0%, rgba(0,0,0,0) 8%, rgba(0,0,0,0) 90%, rgba(255,255,255,.08) 100%) var(--fr);
}
.side.left .menu.explore .plate:nth-child(n) { filter: none; }
/* the page you are on is a copper inlay: no steel calm field over it (the row rules above outrank the material block) */
.side.left .menu.services .plate.is-current:nth-child(n), .side.left .menu.explore .plate.is-current:nth-child(n) { --calm: var(--mt-none); }

/* hover: lifts a hair (compositor), the glint layer fades in (compositor) */
@media (hover: hover) {
  .side.left .menu .plate:hover { transform: translateY(-1px); }
  .side.left .menu .plate:hover::before { opacity: 1; }
  .side.left .menu .plate:hover > .ic-v { color: #191610; }
  .side.left .menu .plate.is-current:hover { transform: translateY(0); }
}
/* pressed: the plate settles 1 px, the face sinks (the bezel's shadow on it), the cast shadow tightens - instant */
.side.left .menu .plate:active { transform: translateY(1px); transition-duration: .06s; --mt-press: var(--mt-sunk); }
.side.left .menu .plate:active { --mt-sh: var(--mt-sh-press); }
.side.left .menu .plate:active > span { transform: none; }
.side.left .menu .plate:active::before { opacity: 0; transition: none; }
/* focus */
.side.left .menu .plate:focus-visible { outline: none; box-shadow: none; z-index: 3; }
.side.left .menu .plate:focus-visible > span::after { opacity: 1; }
/* the page you are on: pressed in, a copper inlay face, cream engraved label */
.side.left .menu .plate.is-current { --mt-press: var(--mt-sunk); --mt-sh: var(--mt-sh-press); }
.side.left .menu .plate.is-current > span { color: #fff9f1; text-shadow: var(--ink-shadow); z-index: auto; }
.side.left .menu .plate.is-current > .ic-v,
.side.left .menu.services .plate.is-current:hover > .ic-v { color: #fff3e2; filter: none; z-index: auto; }
.side.left .menu .plate.is-current:focus-visible { box-shadow: none; }

/* the tray. Round 3: 273 x 534 (rail x12..285, y46..580), the shelf slimmed from 19 px to 11 px (x2..13) so the plates
   gain 14 px of width; the shelf keeps its two slots, its top rivet, the cut at the 6|7 gap (METAL | MOLDING) and the
   rivet under it, re-derived from the new rows (tray y = rail y - 46; row i's plate is drawn at 4.5 + 53 i .. 52.5 + 53 i).
   The 5 px grooves between the plates show the tray's dark floor, where each plate drops its shadow. */
.side.left .recess-services {
  background:
    linear-gradient(90deg, #aeada9 0 2px, rgba(0,0,0,0) 2px) 0 0 / 2px 100% no-repeat,
    linear-gradient(90deg, rgba(255,255,255,.24) 0 1px, rgba(0,0,0,0) 1px) 12px 4px / 1px 526px no-repeat,
    linear-gradient(90deg, #403f3d 0 1px, #2d2c2b 1px 2px, rgba(0,0,0,0) 2px) 2px 4px / 2px 526px no-repeat,
    radial-gradient(circle at 4.6px 2.9px, #efebe2 0 .7px, rgba(255,255,255,0) 1.4px) 3.5px 12px / 9px 9px no-repeat,
    radial-gradient(circle at 4.5px 4.5px, #2b2a28 0 1.5px, #3b3a38 2.2px, #5c5a57 2.8px, rgba(0,0,0,0) 3.2px) 3.5px 12px / 9px 9px no-repeat,
    radial-gradient(circle at 3.9px 5.1px, rgba(255,255,255,0) 2.7px, rgba(255,255,255,.55) 3.1px, rgba(255,255,255,.55) 3.7px, rgba(255,255,255,0) 4.2px) 3.5px 12px / 9px 9px no-repeat,
    radial-gradient(circle at 4.6px 2.9px, #f4f0e8 0 .8px, rgba(255,255,255,0) 1.6px) 3.5px 332px / 9px 9px no-repeat,
    radial-gradient(circle at 4.5px 4.5px, #2b2a28 0 1.8px, #3b3a38 2.5px, #575653 3.1px, rgba(0,0,0,0) 3.5px) 3.5px 332px / 9px 9px no-repeat,
    radial-gradient(circle at 3.8px 5.2px, rgba(255,255,255,0) 3px, rgba(255,255,255,.65) 3.4px, rgba(255,255,255,.65) 4px, rgba(255,255,255,0) 4.5px) 3.5px 332px / 9px 9px no-repeat,
    linear-gradient(180deg, #3c3b39 0 1px, #4c4b49 1px 2px) 2px 319px / 11px 2px no-repeat,
    linear-gradient(90deg, #a5a4a1 0 1px, #908e8b 1px 2px) 271px 0 / 2px 100% no-repeat,
    linear-gradient(180deg, #a4a29e 0%, #9c9a98 12%, #8d8b88 40%, #858381 60%, #817f7c 100%) 2px 0 / 11px 100% no-repeat,
    linear-gradient(90deg, rgba(0,0,0,.20), rgba(0,0,0,0) 30%),
    linear-gradient(180deg, #5d5c59 0%, #575553 50%, #504f4d 100%);
}

/* ------------------------------------------------------------------------------- 2. THE STANDALONE PLATES:
   HOME + UPLOAD (left rail) and SHOW US (right rail). The element is the plate: its own box-shadow is the cast shadow.
   The plate itself (bezel + face + screws) is drawn on the FIRST rivet <img> - a child, so no hover ever restyles it (its
   image is replaced by an empty one; the screws are drawn on the face); the SECOND rivet <img> is the focus ring; the other
   two are hidden. The hover layer is a pseudo-element with no image (::after on HOME/UPLOAD, whose ::after the site's :hover
   rules restyle anyway; ::before on SHOW US), so restyling it repaints nothing. --hov (skin-left.css sets it on hover) is
   pinned, so a hover changes no inherited value. */
.side.left .plate-dark.home, .side.left .plate-copper.upload, .side.right .cta-copper {
  --in: 4px; --hov: rgba(0,0,0,0);
  background: none !important; clip-path: none !important; filter: none !important;
  border-radius: calc(var(--c) * 1.7);
  box-shadow: var(--mt-sh-rest) !important;
  will-change: transform; transform: translateY(0);
  transition: transform .18s cubic-bezier(.2,.8,.2,1);
  outline: none;
}
.side.left .plate-dark.home { --c: 8px; }
.side.left .plate-copper.upload { --c: 9px; }
.side.right .cta-copper { --c: 9px; --gx: -30px; --gy: -50px; }
.side.left .plate-dark.home > img.rivet, .side.left .plate-copper.upload > img.rivet, .side.right .cta-copper > img.rivet { display: none !important; }
.side.left .plate-dark.home > img.rivet:nth-of-type(1), .side.left .plate-copper.upload > img.rivet:nth-of-type(1),
.side.right .cta-copper > img.rivet:nth-of-type(1) {        /* the plate */
  display: block !important; position: absolute; z-index: -1; pointer-events: none;
  content: url("data:image/svg+xml;utf8,<svg xmlns='http://www.w3.org/2000/svg' width='1' height='1'/>");
  left: 0 !important; top: 0 !important; width: 100% !important; height: 100% !important;
  opacity: 1; filter: none; border-radius: 0; box-shadow: none;
  clip-path: polygon(var(--c) 0, calc(100% - var(--c)) 0, 100% var(--c), 100% calc(100% - var(--c)),
                     calc(100% - var(--c)) 100%, var(--c) 100%, 0 calc(100% - var(--c)), 0 var(--c));
  background:
    var(--mt-press) var(--fr),
    var(--inlay, var(--mt-none)),
    var(--bz3), var(--seamc), var(--rv1), var(--rv2), var(--rv3), var(--rv4), var(--lip), var(--shade),
    url("assets/tex/rail-brush.png?h=f79252a0") var(--gx, 0px) var(--gy, 0px) / 256px 128px repeat,
    var(--base), #0d0a07;
}
.side.left .plate-dark.home > img.rivet:nth-of-type(2), .side.left .plate-copper.upload > img.rivet:nth-of-type(2),
.side.right .cta-copper > img.rivet:nth-of-type(2) {        /* the focus ring: 2 px, cut to the chamfer, 2 px clear */
  display: block !important; position: absolute; z-index: 2; pointer-events: none;
  content: url("data:image/svg+xml;utf8,<svg xmlns='http://www.w3.org/2000/svg' width='1' height='1'/>");
  left: -4px !important; top: -4px !important; width: calc(100% + 8px) !important; height: calc(100% + 8px) !important;
  --o: calc(var(--c) + 2.34px); --i: calc(var(--c) + 3.17px);
  clip-path: polygon(evenodd,
    var(--o) 0, calc(100% - var(--o)) 0, 100% var(--o), 100% calc(100% - var(--o)), calc(100% - var(--o)) 100%, var(--o) 100%, 0 calc(100% - var(--o)), 0 var(--o), var(--o) 0,
    var(--i) 2px, calc(100% - var(--i)) 2px, calc(100% - 2px) var(--i), calc(100% - 2px) calc(100% - var(--i)), calc(100% - var(--i)) calc(100% - 2px), var(--i) calc(100% - 2px), 2px calc(100% - var(--i)), 2px var(--i), var(--i) 2px,
    var(--o) 0);
  background: #4a2810; opacity: 0; filter: none; border-radius: 0;
}
/* the hover layer (no image), and the pseudo-elements the site's skins painted, emptied */
.side.left .plate-dark.home:is(*, :hover, :active)::after, .side.left .plate-copper.upload:is(*, :hover, :active)::after,
.side.right .cta-copper::before {
  content: ""; position: absolute; inset: 0; z-index: 1; pointer-events: none; clip-path: none; filter: none;
  border-radius: calc(var(--c) * 1.7);
  background: var(--glint); box-shadow: var(--mt-sh-lift);
  opacity: 0; will-change: opacity; transition: opacity .18s linear;
}
.side.left .plate-copper.upload:is(*, :hover, :active)::after, .side.right .cta-copper::before { background: var(--glint), var(--warm); }
.side.left .plate-dark.home:is(*, :focus-visible, :active, .is-current, .is-current:active)::before,
.side.left .plate-copper.upload:is(*, :focus-visible, :active)::before,
.side.right .cta-copper::after { content: none; display: none; }
@media (hover: hover) {
  .side.left .plate-dark.home:hover, .side.left .plate-copper.upload:hover, .side.right .cta-copper:hover { transform: translateY(-1px); filter: none !important; }
  .side.left .plate-dark.home:hover::after, .side.left .plate-copper.upload:hover::after, .side.right .cta-copper:hover::before { opacity: 1; }
  .side.left .plate-dark.home.is-current:hover,
  .side.right .cta-copper.is-current:hover, .side.right .cta-copper[aria-current]:hover { transform: translateY(0); }
}
.side.left .plate-dark.home:active, .side.left .plate-copper.upload:active, .side.right .cta-copper:active {
  transform: translateY(1px); transition-duration: .06s; --mt-press: var(--mt-sunk); filter: none !important;
  box-shadow: var(--mt-sh-press) !important;
}
.side.left .plate-dark.home:active::after, .side.left .plate-copper.upload:active::after, .side.right .cta-copper:active::before { opacity: 0; transition: none; }
.side.left .plate-dark.home:active span, .side.left .plate-copper.upload:active span { transform: none; }
.side.right .cta-copper:active b, .side.right .cta-copper:active span { transform: none; }
.side.left .plate-dark.home:focus-visible, .side.left .plate-copper.upload:focus-visible, .side.right .cta-copper:focus-visible { outline: none; }
.side.left .plate-dark.home:focus-visible > img.rivet:nth-of-type(2),
.side.left .plate-copper.upload:focus-visible > img.rivet:nth-of-type(2),
.side.right .cta-copper:focus-visible > img.rivet:nth-of-type(2) { opacity: 1; }
/* HOME: black anodised */
.side.left .plate-dark.home {
  --rk0: #f1efeb; --rk1: #cbc8c2; --rk2: #918d86; --rk3: #4a4743; --rk4: rgba(40,38,35,0);
  --rl: rgba(255,255,255,.20); --rd: rgba(0,0,0,.70); --rs: rgba(0,0,0,.62);
  --lip:
    linear-gradient(rgba(255,255,255,.13), rgba(255,255,255,.13)) var(--in) var(--in) / calc(100% - var(--in) * 2) 1px no-repeat,
    linear-gradient(rgba(0,0,0,.6), rgba(0,0,0,.6)) var(--in) calc(100% - var(--in)) / calc(100% - var(--in) * 2) 1px no-repeat,
    linear-gradient(rgba(0,0,0,.35), rgba(0,0,0,.35)) var(--in) var(--in) / 1px calc(100% - var(--in) * 2) no-repeat,
    linear-gradient(rgba(255,255,255,.05), rgba(255,255,255,.05)) calc(100% - var(--in)) var(--in) / 1px calc(100% - var(--in) * 2) no-repeat;
  --shade:
    radial-gradient(42% 90% at 50% 0, rgba(255,255,255,.07), rgba(255,255,255,0) 70%) var(--fr),
    linear-gradient(180deg, rgba(255,255,255,0) 6%, rgba(255,255,255,.035) 16%, rgba(255,255,255,0) 30%) var(--fr);
  --base: linear-gradient(180deg, #2c2b28 0, #22211f 26%, #1c1b19 60%, #161513 100%) var(--fr);
  --gx: -60px; --gy: -30px;
  --glint:
    linear-gradient(90deg, rgba(255,255,255,0), rgba(255,255,255,.5) 45%, rgba(255,255,255,.95)) var(--c) 1px / calc(100% - var(--c) * 2) 1px no-repeat,
    linear-gradient(225deg, rgba(255,255,255,0) var(--d), rgba(255,255,255,.95) 0 calc(var(--d) + 2px), rgba(255,255,255,0) 0) right top / 18px 18px no-repeat,
    linear-gradient(180deg, rgba(255,255,255,.6), rgba(255,255,255,0) 80%) calc(100% - 1px) var(--c) / 1px calc(100% - var(--c) * 2) no-repeat,
    linear-gradient(rgba(255,255,255,.045), rgba(255,255,255,.045)) var(--fr),
    radial-gradient(60% 140% at 85% 0, rgba(255,255,255,.07), rgba(255,255,255,0) 72%) var(--fr);
}
.side.left .plate-dark.home span {
  left: 0; right: 0; top: 50%; margin-top: -7.25px; text-align: center; transform: none;
  color: #ece5da; text-shadow: 0 calc(var(--dp) * -1) 0 rgba(0,0,0,.75);
}
.side.left .plate-copper.upload { --gx: -140px; --gy: -10px; }
.side.left .plate-copper.upload .up-title { color: #fff9f1; text-shadow: var(--ink-shadow); }
.side.left .plate-copper.upload .up-sub { color: #f6e6d2; text-shadow: 0 calc(var(--dp) * -1) 0 rgba(52,22,4,.45); }
.side.left .plate-copper.upload > .ic-v { color: #fff3e2; }
/* HOME on the home page: pressed in, a copper inlay round the black face, copper label (no glow filter) */
.side.left .plate-dark.home.is-current, .tex .side.left .plate-dark.home.is-current {
  filter: none !important; box-shadow: var(--mt-sh-press) !important; --mt-press: var(--mt-sunk);
  --inlay:
    linear-gradient(rgba(227,154,79,.95), rgba(227,154,79,.95)) calc(var(--in) + 3px) calc(var(--in) + 3px) / calc(100% - var(--in) * 2 - 6px) 1.5px no-repeat,
    linear-gradient(rgba(150,90,40,.95), rgba(150,90,40,.95)) calc(var(--in) + 3px) calc(100% - var(--in) - 3px) / calc(100% - var(--in) * 2 - 6px) 1.5px no-repeat,
    linear-gradient(rgba(170,104,48,.95), rgba(170,104,48,.95)) calc(var(--in) + 3px) calc(var(--in) + 3px) / 1.5px calc(100% - var(--in) * 2 - 6px) no-repeat,
    linear-gradient(rgba(227,154,79,.95), rgba(227,154,79,.95)) calc(100% - var(--in) - 3px) calc(var(--in) + 3px) / 1.5px calc(100% - var(--in) * 2 - 6px) no-repeat;
  --p1: left calc(var(--in) + 8px) top calc(var(--in) + 7px);   --p2: right calc(var(--in) + 8px) top calc(var(--in) + 7px);
  --p3: left calc(var(--in) + 8px) bottom calc(var(--in) + 7px); --p4: right calc(var(--in) + 8px) bottom calc(var(--in) + 7px);
}
.side.left .plate-dark.home.is-current:is(*, :hover, :active)::after { box-shadow: none; }
.side.left .plate-dark.home.is-current span { color: #f2b77a; text-shadow: 0 calc(var(--dp) * -1) 0 rgba(0,0,0,.8); }
/* the old panel painted a shadow band under HOME and UPLOAD; the plates cast their own now. Same panel, minus those two. */
/* v2: a soft sheen on the panel where the EXPLORE title sits (the steel there is the rail's darkest band, L* 57 under the
   word): the light of the top right pooling under the SERVICES tray's lip, so the deep copper title reads at >= 4.5:1 */
.side.left {
  background:
    radial-gradient(ellipse 124px 24px at 152px 599px, rgba(255,255,255,.46) 0, rgba(255,255,255,.36) 50%, rgba(255,255,255,0) 100%),
    linear-gradient(90deg, rgba(0,0,0,.52) 0 1px, rgba(0,0,0,.36) 1px 2px, rgba(255,255,255,.30) 2px 3px, rgba(255,255,255,.08) 3px 4px) 100% 607px / 4px 110px no-repeat,
    linear-gradient(90deg, rgba(255,255,255,.34) 0 1px, rgba(255,255,255,.62) 1px 2px, rgba(0,0,0,.24) 2px 3px, rgba(0,0,0,.66) 3px 4px) 100% 0 / 4px 100% no-repeat,
    radial-gradient(ellipse 90px 120px at 100% 0, rgba(255,255,255,.30), rgba(255,255,255,0) 100%),
    linear-gradient(rgba(255,255,255,.14), rgba(255,255,255,.14)) 290px 720px / 12px 44px no-repeat,
    linear-gradient(180deg, rgba(0,0,0,.50) 0 640px, rgba(0,0,0,.30) 652px, rgba(0,0,0,.27) 700px, rgba(0,0,0,.14) 716px, rgba(0,0,0,.10) 872px) 288px 0 / 8px 100% no-repeat,
    linear-gradient(180deg, rgba(0,0,0,.26) 0 638px, rgba(0,0,0,.12) 652px, rgba(0,0,0,.10) 706px, rgba(0,0,0,.02) 730px, rgba(0,0,0,.02) 872px) 296px 0 / 5px 100% no-repeat,
    linear-gradient(180deg, rgba(0,0,0,.42) 0, rgba(0,0,0,.42) 70px, rgba(0,0,0,0) 100%) 288px 617px / 2px 95px no-repeat,
    linear-gradient(rgba(255,255,255,.42), rgba(255,255,255,.42)) 26px 45px / 256px 1px no-repeat,
    var(--blotch) 0 0 / 420px 420px,
    linear-gradient(to top right, rgba(0,0,0,.10), rgba(0,0,0,0) 45%),
    linear-gradient(90deg, rgba(0,0,0,.25) 0%, rgba(0,0,0,.18) 25%, rgba(0,0,0,.11) 60%, rgba(0,0,0,.03) 92%, rgba(0,0,0,0) 100%),
    linear-gradient(180deg, #dad8d4 0%, #d4d3cf 6%, #cbcac6 21%, #bdbbb8 35%, #b3b1ae 46%, #a8a7a4 54%, #a1a09d 67%, #9c9b98 79%, #9a9996 87%, #918f8c 98%, #8d8b89 100%);
  background-blend-mode: normal, normal, normal, normal, normal, normal, normal, normal, normal, multiply, normal, normal, normal;
}

/* ------------------------------------------------------------------------------- 3. RIGHT RAIL: the seven cards
   li.card = the plate (cast shadow); li::after = bezel + face + 4 screws (z -1); li::before = the hover layer (z 1, over
   the words); a.card-link::before = the focus ring. The FDM page's color-dodge hover layer (story.css) is replaced:
   this one is the same kind of layer (opacity only, its own layer) and the plate's raster never changes. */
.side.right .card {
  --c: 7px; --in: 4px;
  --t0: #dddbd8; --t1: #cbc9c6;
  background: none; border-radius: calc(var(--c) * 1.7);
  box-shadow: var(--mt-sh-rest);
  filter: none !important; isolation: auto;
  will-change: transform; transform: translateY(0);
  transition: transform .18s cubic-bezier(.2,.8,.2,1) !important;
  outline: none !important;
}
/* v2: the cards one step lighter (L* 79-83 under the words; v1 70-78) and calmed under the words like the left plates.
   Round 3: the description line sits at 68-87 % of the card's height, so the face's lower shade starts at 86 % (was 64 %) */
.side.right .card {
  --shade:
    linear-gradient(180deg, rgba(255,255,255,0) 2%, rgba(255,255,255,.22) 8%, rgba(255,255,255,.06) 13%, rgba(255,255,255,0) 17%) var(--fr),
    linear-gradient(180deg, rgba(0,0,0,0) 86%, rgba(0,0,0,.12) 100%) var(--fr),
    linear-gradient(90deg, rgba(0,0,0,.20) 0%, rgba(0,0,0,.09) 15%, rgba(0,0,0,0) 30%, rgba(0,0,0,0) 84%, rgba(255,255,255,.08) 100%) var(--fr);
}
.side.right .card:nth-child(1) { --t0: #dddcda; --t1: #cbcac8;
  --calm: linear-gradient(90deg, rgba(212,211,209,0) 16%, rgba(212,211,209,0.72) 21%, rgba(212,211,209,0.72) 91%, rgba(212,211,209,0) 95%) var(--fr); }
.side.right .card:nth-child(2) { --gx: -70px; --gy: -40px; --t0: #dbdad8; --t1: #c9c8c6;
  --calm: linear-gradient(90deg, rgba(210,209,207,0) 16%, rgba(210,209,207,0.72) 21%, rgba(210,209,207,0.72) 91%, rgba(210,209,207,0) 95%) var(--fr); }
.side.right .card:nth-child(3) { --gx: -140px; --gy: -10px; --t0: #dad9d7; --t1: #c8c7c5;
  --calm: linear-gradient(90deg, rgba(209,208,206,0) 16%, rgba(209,208,206,0.72) 21%, rgba(209,208,206,0.72) 91%, rgba(209,208,206,0) 95%) var(--fr); }
.side.right .card:nth-child(4) { --gx: -30px; --gy: -60px; --t0: #d8d7d5; --t1: #c6c5c3;
  --calm: linear-gradient(90deg, rgba(207,206,204,0) 16%, rgba(207,206,204,0.72) 21%, rgba(207,206,204,0.72) 91%, rgba(207,206,204,0) 95%) var(--fr); }
.side.right .card:nth-child(5) { --gx: -110px; --gy: -90px; --t0: #d6d5d3; --t1: #c4c3c1;
  --calm: linear-gradient(90deg, rgba(205,204,202,0) 16%, rgba(205,204,202,0.72) 21%, rgba(205,204,202,0.72) 91%, rgba(205,204,202,0) 95%) var(--fr); }
.side.right .card:nth-child(6) { --gx: -190px; --gy: -20px; --t0: #d5d4d2; --t1: #c3c2c0;
  --calm: linear-gradient(90deg, rgba(204,203,201,0) 16%, rgba(204,203,201,0.72) 21%, rgba(204,203,201,0.72) 91%, rgba(204,203,201,0) 95%) var(--fr); }
.side.right .card:nth-child(7) { --gx: -50px; --gy: -100px; --t0: #d3d2d0; --t1: #c1c0be;
  --calm: linear-gradient(90deg, rgba(202,201,199,0) 16%, rgba(202,201,199,0.72) 21%, rgba(202,201,199,0.72) 91%, rgba(202,201,199,0) 95%) var(--fr); }
/* (two screws, on the right, as the cards always had and as the SERVICES plates have: a list of plates reads calmer
   with its screws in one column; the three asks keep the buttons' four) */
.side.right .card::after {
  content: ""; display: block; position: absolute; inset: 0; z-index: -1; pointer-events: none;
  border-radius: 0; box-shadow: none; filter: none; transition: none;
  clip-path: polygon(var(--c) 0, calc(100% - var(--c)) 0, 100% var(--c), 100% calc(100% - var(--c)),
                     calc(100% - var(--c)) 100%, var(--c) 100%, 0 calc(100% - var(--c)), 0 var(--c));
  background:
    var(--mt-press) var(--fr),
    var(--bz3), var(--seamc), var(--rv2), var(--rv4), var(--lip), var(--shade), var(--calm, var(--mt-none)),
    url("assets/tex/rail-brush.png?h=f79252a0") var(--gx, 0px) var(--gy, 0px) / 256px 128px repeat,
    var(--base), #0d0a07;
}
.side.right .card::before {
  content: ""; display: block; position: absolute; inset: 0; z-index: 1; pointer-events: none;
  border-radius: calc(var(--c) * 1.7);
  background: var(--glint); box-shadow: var(--mt-sh-lift);
  opacity: 0; will-change: opacity; transition: opacity .18s linear;
}
.side.right .card > .card-link::after { display: none !important; content: none !important; }
.side.right .card > .card-link { outline: none; box-shadow: none; z-index: auto; }
.side.right .card > .card-link::before {     /* focus ring */
  content: ""; position: absolute; pointer-events: none; display: block;
  left: -4px; right: -4px; top: -4px; bottom: -4px; width: auto; background-image: none;
  --o: calc(var(--c) + 2.34px); --i: calc(var(--c) + 3.17px);
  clip-path: polygon(evenodd,
    var(--o) 0, calc(100% - var(--o)) 0, 100% var(--o), 100% calc(100% - var(--o)), calc(100% - var(--o)) 100%, var(--o) 100%, 0 calc(100% - var(--o)), 0 var(--o), var(--o) 0,
    var(--i) 2px, calc(100% - var(--i)) 2px, calc(100% - 2px) var(--i), calc(100% - 2px) calc(100% - var(--i)), calc(100% - var(--i)) calc(100% - 2px), var(--i) calc(100% - 2px), 2px calc(100% - var(--i)), 2px var(--i), var(--i) 2px,
    var(--o) 0);
  background: var(--mt-ring); opacity: 0;
}
.side.right .card h3 { text-shadow: var(--ink-shadow); }
.side.right .card p { text-shadow: 0 var(--dp) 0 rgba(255,255,255,.40); }
.side.right .card .ic-v, .side.right .card:hover .ic-v { color: #191610; filter: none; }
@media (hover: hover) {
  .side.right .card:hover { transform: translateY(-1px); filter: none !important; }
  .side.right .card:hover::before { opacity: 1; }
  .side.right .card:has(.card-link.is-current):hover { transform: translateY(0); }
}
.side.right .card:active { transform: translateY(1px); transition-duration: .06s !important; filter: none !important;
  --mt-press: var(--mt-sunk); box-shadow: var(--mt-sh-press); }
.side.right .card:active::before { opacity: 0; transition: none; }
.side.right .card:active h3, .side.right .card:active p { transform: translateY(.5px); }
.side.right .card:has(.card-link:focus-visible) { z-index: 3; outline: none !important; }
.side.right .card > .card-link:focus-visible { outline: none; box-shadow: none; }
.side.right .card > .card-link:focus-visible::before { opacity: 1; }
/* the card of the page you are on: pressed in, copper inlay face, cream words (it fixes the dark-on-black title too) */
.side.right .card.is-current, .side.right .card:has(.card-link.is-current) {
  background: none; box-shadow: var(--mt-sh-press); --mt-press: var(--mt-sunk);
}
.side.right .card:has(.card-link.is-current) h3 { color: #fff9f1; text-shadow: var(--ink-shadow); }
.side.right .card:has(.card-link.is-current) p { color: #f6e6d2; text-shadow: 0 calc(var(--dp) * -1) 0 rgba(52,22,4,.45); }
.side.right .card:has(.card-link.is-current) .ic-v,
.side.right .card:has(.card-link.is-current):hover .ic-v { color: #fff3e2; filter: none; }
/* (round 3: card 6's title is "Create something for / display or film" now - as short as the others, so it takes their
   16.5 px again; v1 had set it at 15 px for the old "...display, / film or presentation") */

/* SHOW US: copper, engraved cream type. Scoped to the rail: .cta-copper is also the pages' own CTA class. */
.side.right .cta-copper b { color: #fff9f1; text-shadow: var(--ink-shadow); }
.side.right .cta-copper span { color: #f6e6d2; text-shadow: 0 calc(var(--dp) * -1) 0 rgba(52,22,4,.45); }
/* /show-us/: the rail's ask is the page you are on - pressed in, a fine lit inlay line (it had no current state) */
.side.right .cta-copper.is-current, .side.right .cta-copper[aria-current] {
  box-shadow: var(--mt-sh-press) !important; --mt-press: var(--mt-sunk);
  --inlay:
    linear-gradient(rgba(255,226,186,.85), rgba(255,226,186,.85)) calc(var(--in) + 13px) calc(var(--in) + 3px) / calc(100% - var(--in) * 2 - 26px) 1px no-repeat,
    linear-gradient(rgba(255,226,186,.55), rgba(255,226,186,.55)) calc(var(--in) + 13px) calc(100% - var(--in) - 3px) / calc(100% - var(--in) * 2 - 26px) 1px no-repeat;
}

/* ------------------------------------------------------------------------------- 5. THE PANELS' OWN RIVETS
   The big rivets (rivet_lg.png, 19 px) and the right rail's copper foot rivets (rivet_copper.png, 20 px) are 1x bitmaps:
   soft on any stage scale above 1, and the copper pair never took the palette. Drawn here in CSS like the plates' screws
   (the <img> keeps its box; its image is replaced by an empty one): a dark socket-head screw in a counterbore, and a
   copper cup rivet. Same size, same place, same light. */
.side .rivet-lg {
  content: url("data:image/svg+xml;utf8,<svg xmlns='http://www.w3.org/2000/svg' width='1' height='1'/>");
  background:
    radial-gradient(circle 1.7px at 12.2px 6.6px, rgba(255,255,255,.80), rgba(255,255,255,0)),
    radial-gradient(circle 2.9px at 9.6px 9.4px, #070606 0 1.5px, rgba(20,19,18,.85) 2.2px, rgba(60,57,53,0) 2.9px),
    radial-gradient(circle 3.6px at 8.9px 10.2px, rgba(255,255,255,.18) 2.6px, rgba(255,255,255,0) 3.6px),
    radial-gradient(circle 4.2px at 11.6px 7.4px, rgba(255,255,255,.26), rgba(255,255,255,0)),
    radial-gradient(circle 7.3px at 9.5px 9.5px, #3a3733 0, #2d2a27 3.6px, #201e1c 5.8px, #141312 6.9px, rgba(20,19,18,0) 7.3px),
    radial-gradient(circle 9.5px at 8.9px 10.1px, rgba(255,255,255,0) 7.1px, rgba(255,255,255,.55) 7.8px, rgba(255,255,255,0) 8.9px),
    radial-gradient(circle 9.5px at 10.1px 8.9px, rgba(0,0,0,0) 6.8px, rgba(0,0,0,.42) 7.4px, rgba(0,0,0,0) 8.7px);
}
.side.right .rivet-lg { clip-path: circle(7.4px at 50% 50%); }
.side.right .rivet-copper {
  content: url("data:image/svg+xml;utf8,<svg xmlns='http://www.w3.org/2000/svg' width='1' height='1'/>");
  background:
    radial-gradient(circle 1.8px at 13.2px 6.8px, rgba(255,242,224,.92), rgba(255,242,224,0)),
    radial-gradient(circle 3.2px at 9.8px 10.4px, #1a0d05 0 1.7px, #3a1d0a 2.4px, rgba(58,29,10,0) 3.2px),
    radial-gradient(circle 5.2px at 8.8px 11.4px, rgba(255,214,170,.34), rgba(255,214,170,0) 5.2px),
    radial-gradient(circle 4.4px at 12.6px 7.4px, rgba(255,226,190,.42), rgba(255,226,190,0)),
    radial-gradient(circle 7.8px at 10px 10px, #b97a43 0, #9a6331 3.4px, #7a4a21 5.6px, #4e2c10 7.1px, rgba(78,44,16,0) 7.8px);
}


/* ------------------------------------------------------------------------------- 6. THE HOVER STAYS IN THE RAIL
   A transform being animated has bounds Chrome cannot know, so everything painted after it in the same paint order is
   "assumed" to overlap it and is given a layer of its own the moment the animation starts. Measured on the first lift of a
   SERVICES plate: the centre panel (main.hero, 1696x872) and the rest of the left rail (305x872) were made into new layers
   and rastered - a 100-117 ms GPU task, the film stalled once per page load. Two cures, both static:
   - paint containment on each rail: the rail clips its own painting (nothing in it reaches past its box), so the assumed
     bounds end at the rail's edge and the centre panel is never touched;
   - the two things painted after the SERVICES plates that are not plates themselves (the EXPLORE title and its well) get
     their layer at load, so no layer is ever created by a hover. */
.side.left, .side.right:not(.side-ph) { contain: paint; }
.side.left #lbl-explore, .side.left .recess-explore { will-change: transform; }


/* ------------------------------------------------------------------------------- 7. TYPE AND LEGIBILITY
   v1 (final polish): the palettes keep a colour's LIGHTNESS, so a copper that reads well in the default turns pale in
   Emerald, Teal and Safety Yellow; each ink here is set deep enough to hold there too.
   v2 (2026-10-06, the owner: the left menu's words are not readable). Measured off the screen at 1366x657 (scale 0.66),
   v1's left labels were 9.6 px on screen (caps 6.8 px), heavy and 58 % condensed, with half of their glyph pixels never
   reaching the ink; the face under half of them was mid grey (L* 56-63: 5.2-6.5:1); a light/dark engrave fringe sat round
   every stroke. v2: a lighter, calmer face (section 1), one crisp under-cut (--ink-shadow), and a label 7 % larger and
   17 % wider at the same weight - the film buttons' open condensed caps rather than a squeezed black. */
/* round 3 (the owner, 04:00: "each one is so small the words can't be made out - and this is the most important part of
   the site"): the SERVICES words go from 14.5 to 18 px (+24 %: 11.9 px on a 1366x768 screen, 17.2 px on a 1920x1080 one),
   bold 700 instead of 800 (the counters stay open at 12 device px), at the font's near-normal width (at these sizes Roboto
   Flex's width axis moves a word by 6 % at most - 58 % never was condensed; it only tightened the spacing). The icons grow
   with the plate (36 px). EXPLORE, the secondary list, is set at 15 px in its two columns. */
.side.left .menu.services .plate > span { font-size: 18px; font-weight: 700; font-stretch: 80%; letter-spacing: .012em; }
/* the two-line names: two lines of 17.5 px leading in the 44 px face, centred */
.side.left .menu.services .plate.two > span { white-space: normal; line-height: 17.5px; letter-spacing: .008em; }
.side.left .menu.explore .plate > span { font-size: 16px; font-weight: 700; font-stretch: 80%; letter-spacing: .03em; }
/* the icons: 36 px on the 48 px plate, stroke 2.1 units (1.6 device px at 0.66, 2.6 at 1.09) - they hold their lines */
.side.left .menu.services .plate > .ic-v { left: 5px; width: 36px; height: 36px; stroke-width: 2.1; }
.side.right .card .ic-v, .side.left .plate-copper.upload > .ic-v { stroke-width: 1.9; }

/* the rail titles: one crisp under-cut, and a deeper copper - EXPLORE sits lower on the panel, where the steel is darker
   (L* 57 under it; v1 #56300f gave 3.35:1, and 2.9-3.3:1 in Emerald, Teal and Safety Yellow, whose dark accents are
   brighter than copper's at the same lightness). With the sheen above: >= 4.5:1 in all 8 schemes. */
.side.left .rail-title, .side.right .rail-title { color: #3f2008; text-shadow: 0 var(--dp) 0 rgba(255,255,255,.6); }

/* the right rail's small words: the question, the card descriptions, "DON'T SEE YOUR PROJECT?" - set at 8.3 px on screen
   in v1 at 400-540 weight, only 4-18 % of their glyph pixels reached the ink (2.3-3.1:1 as rendered at 1366x657) */
.side.right .rail-q { font-weight: 600; color: #2a2825; }
.side.right .card p { font-size: 14px; font-weight: 650; letter-spacing: .005em; color: #2e2c29; }   /* round 3: 13.5 / 600 -> 14 / 650 (rendered 4.4:1 -> see the table; still one line, 17 px clear of the screws) */
.side.right .fallback-label { font-size: 13px; font-weight: 700; font-stretch: 66%; letter-spacing: .08em; color: #2e1906;
  text-shadow: 0 var(--dp) 0 rgba(255,255,255,.42); }
.side.right .cta-copper span { font-size: 13px; font-weight: 560; }
.side.left .plate-copper.upload .up-sub { font-size: 11.5px; }

/* HOME, UPLOAD and SHOW US speak like the film's buttons: bold condensed caps, tracked wide, engraved */
.side.left .plate-dark.home span {
  font: 700 15px/1 var(--label); font-stretch: 58%; letter-spacing: .2em; text-indent: .2em; margin-top: -7.5px;
}
.side.left .plate-copper.upload .up-title { font-weight: 700; font-stretch: 58%; letter-spacing: .12em; }
.side.left .plate-copper.upload .up-sub { font-weight: 650; }
.side.right .cta-copper b { font-weight: 700; font-stretch: 62%; letter-spacing: .1em; }

/* UPLOAD and SHOW US carry their title in the upper half: the copper's specular band rides above it (3-18 % of the height,
   as on the film plates, where the band is kept clear of the words), and the soft warm cloud sits low at the left */
.side.left .plate-copper.upload, .side.right .cta-copper {
  --shade:
    linear-gradient(180deg, rgba(255,247,240,0) 3%, rgba(255,247,240,.12) 8.5%, rgba(255,247,240,.035) 13%, rgba(255,247,240,0) 18%) var(--fr),
    radial-gradient(46% 70% at 14% 78%, rgba(255,210,164,.06), rgba(255,210,164,0) 72%) var(--fr),
    radial-gradient(52% 120% at 84% 82%, rgba(34,12,0,.12), rgba(34,12,0,0) 70%) var(--fr),
    linear-gradient(90deg, rgba(40,16,2,.10), rgba(40,16,2,0) 28%, rgba(255,214,170,.04) 66%, rgba(40,16,2,.05)) var(--fr),
    var(--veil);
}
/* v2: under the cream words every copper face is a step deeper. The palettes keep a colour's LIGHTNESS, and a yellow,
   green or teal "copper" is far brighter than copper at the same lightness, so v1's words fell to 4.0-4.8:1 in Emerald,
   Teal and Safety Yellow. A NEUTRAL veil (black at 12 %, which make_palettes.py leaves alone) deepens all eight schemes
   alike; it starts under the specular band, so the top of the plate keeps its bright copper. */
.side.right .cta-copper, .side.left .plate-copper.upload {
  --veil: linear-gradient(180deg, rgba(0,0,0,0) 11%, rgba(0,0,0,.21) 21%, rgba(0,0,0,.21) 100%) var(--fr);
}
/* the copper inlay of the page you are on: the same deeper step, flat (its words sit mid-face) */
.side.left .menu .plate.is-current, .side.right .card:has(.card-link.is-current) {
  --shade:
    linear-gradient(180deg, rgba(255,247,240,0) 6%, rgba(255,247,240,.11) 14%, rgba(255,247,240,.03) 22%, rgba(255,247,240,0) 30%) var(--fr),
    radial-gradient(56% 60% at 20% 16%, rgba(255,210,164,.08), rgba(255,210,164,0) 72%) var(--fr),
    radial-gradient(52% 120% at 84% 82%, rgba(34,12,0,.12), rgba(34,12,0,0) 70%) var(--fr),
    linear-gradient(90deg, rgba(40,16,2,.10), rgba(40,16,2,0) 28%, rgba(255,214,170,.04) 66%, rgba(40,16,2,.05)) var(--fr),
    linear-gradient(rgba(0,0,0,.18), rgba(0,0,0,.18)) var(--fr);
}

/* ------------------------------------------------------------------------------- 8. ROUND 3: THE LEFT RAIL RE-BALANCED
   SERVICES gets the room (the plates' own boxes - top, height, and EXPLORE's left / width - are in the shell's markup:
   site/index_patch.json; everything else is here). Stage px, rail-local (the rail is 305 x 872):
     SERVICES title  y13      (was 34)       26 px, unchanged
     SERVICES tray   y46..580 (was 70..457)  ten 53 px rows, each plate drawn 48 px tall with a 5 px groove (was 38.6 / 0.4)
     EXPLORE title   y589     (was 461)      20 px (was 26): the secondary heading
     EXPLORE well    y615..712 (was 495..697) two columns of 31 px rows: 3 rows instead of 5
     HOME            y720..764 (was 697..754) 44 px (was 57)
     UPLOAD          y772..844 (was 767..847) 72 px (was 80)
   The tray and the well widen to x12..285 (was 16..281 / 35..288), the plates to x25..283 (258 px, was 35..279). */
.side.left #lbl-services { top: 13px; }
.side.left #lbl-explore { top: 589px; font-size: 20px; letter-spacing: .12em; padding-left: .12em; }
.side.left .recess-services { left: 12px; top: 46px; width: 273px; height: 534px; border-radius: 5px 3px 3px 5px; }
.side.left .recess-services .slot { left: 3.5px; width: 7px; border-radius: 4px; }
.side.left .recess-services .slot-a { top: 30px; height: 256px; }     /* tray y30..286: 0.53 into row 1 .. 0.34 into row 6 */
.side.left .recess-services .slot-b { top: 356px; height: 140px; }    /* tray y356..496: 0.70 into row 7 .. 0.30 into row 10 */
.side.left .menu.services .plate { left: 25px; width: 258px; }
.side.left > .rivet-lg:nth-of-type(3) { top: 589.5px !important; }   /* the right-hand rivet stays beside the EXPLORE title */
.side.left .recess-explore {
  left: 12px; top: 615px; width: 273px; height: 97px; border-radius: 4px;
  background:
    linear-gradient(180deg, rgba(0,0,0,.30) 0 1px, rgba(255,255,255,.14) 1px 2px, rgba(0,0,0,0) 2px) 0 0 / 100% 2px no-repeat,
    linear-gradient(90deg, #aeada9 0 2px, rgba(0,0,0,0) 2px) 0 0 / 2px 100% no-repeat,
    linear-gradient(90deg, #a5a4a1 0 1px, #908e8b 1px 2px) 271px 0 / 2px 100% no-repeat,
    linear-gradient(90deg, rgba(0,0,0,.20), rgba(0,0,0,0) 30%),
    linear-gradient(180deg, #5d5c59 0%, #575553 50%, #504f4d 100%);
  box-shadow: inset 0 1px 0 rgba(0,0,0,.20), 0 1px 0 rgba(255,255,255,.14);
}
/* skin-left.css pins About Us to 36 px with !important (an old fix for the five-row list) */
.side.left .menu.explore .plate:nth-child(4) { height: 31px !important; }
.side.left .plate-dark.home { left: 12px; top: 720px; width: 273px; height: 44px; }
.side.left .plate-copper.upload { left: 12px; top: 772px; width: 273px; height: 72px; }
.side.left .plate-dark.home span { font-size: 16px; margin-top: -8px; }
.side.left .plate-copper.upload .up-title { top: 16px; left: 70px; font-size: 16px; }
.side.left .plate-copper.upload .up-sub { top: 36px; left: 70px; right: 14px; font-size: 11.5px; line-height: 13.5px; }
.side.left .plate-copper.upload > .ic-v { left: 15px; width: 40px; height: 40px; }

/* ------------------------------------------------------------------------------- 9. REVIEW (2026-10-06, independent check)
   Measured off the screen in headful Edge: the words now clear the screws instead of running into them.
   - The two longest two-line SERVICES names ended 5-7 stage px from the screw column ("REVERSE ENGINEERING" next to the
     bottom screw, "QUALITY INSPECTION &" next to the top one: at 1366x657 the screw read as a full stop after the word).
     Their tracking goes to 0 (2.7 px back), at the same 18 px.
   - The cards' descriptions at 14 px ran to 2.6 stage px of the bottom-right screw ("...worn parts", "...or photo",
     "...enclosures": touching at 1366x657). The text column moves 3 px left (the icon keeps 4 px of box clear) and the
     description's tracking goes to 0, same size and weight.
   - UPLOAD's small line was 11.5 px (7.6 px on a 1366x768 screen, the smallest words on either rail); it takes 12.5 px
     in the room the 72 px plate has under its title (still two lines, clear of the four screws). */
.side.left .menu.services .plate.two > span { letter-spacing: 0; }
.side.right .card h3, .side.right .card p { left: 59px; }
.side.right .card p { letter-spacing: 0; }
.side.left .plate-copper.upload .up-sub { top: 35px; font-size: 12.5px; line-height: 14px; }
/* - Hover washed the cream words on copper. The hover layer sits OVER the words and carries a white face wash (22 % at
     the top right, 10 % down the top half). On the copper faces that lifted the ground under the cream: UPLOAD's title
     fell to 4.6:1 (3.7 on its lightest patch, 4.3 as drawn) and SHOW US to 5.2 / 4.1 in Safety Yellow; the current
     plate / card / HOME to 3.7-4.3 on their lightest patch.
     The page you are on is pressed in and does not lift, so it takes no glint at all (as when pressed). The two copper
     asks keep their hover - the 1 px lift, the warm rim and the glint along the lit edges - with the face wash cut to 8 %. */
.side.left .plate-copper.upload, .side.right .cta-copper {
  --glint-cu:
    linear-gradient(90deg, rgba(255,255,255,0), rgba(255,255,255,.5) 45%, rgba(255,255,255,.95)) var(--c) 1px / calc(100% - var(--c) * 2) 1px no-repeat,
    linear-gradient(225deg, rgba(255,255,255,0) var(--d), rgba(255,255,255,.95) 0 calc(var(--d) + 2px), rgba(255,255,255,0) 0) right top / 18px 18px no-repeat,
    linear-gradient(180deg, rgba(255,255,255,.6), rgba(255,255,255,0) 80%) calc(100% - 1px) var(--c) / 1px calc(100% - var(--c) * 2) no-repeat,
    radial-gradient(70% 150% at 90% 0, rgba(255,255,255,.08), rgba(255,255,255,0) 72%) var(--fr);
}
.side.left .plate-copper.upload:is(*, :hover, :active)::after, .side.right .cta-copper::before { background: var(--glint-cu), var(--warm); }
@media (hover: hover) {
  .side.left .menu .plate.is-current:hover::before,
  .side.left .plate-dark.home.is-current:hover::after,
  .side.right .card:has(.card-link.is-current):hover::before,
  .side.right .cta-copper.is-current:hover::before, .side.right .cta-copper[aria-current]:hover::before { opacity: 0; }
}
/* - "DON'T SEE YOUR PROJECT?" (13 px, 8.6 px on a 1366x768 screen, condensed) drew at 4.8:1: its thin strokes never
     reach the ink. A half step larger, a little heavier, a deeper brown (the palettes keep it near-black in every scheme). */
.side.right .fallback-label { font-size: 13.5px; font-weight: 760; color: #231204; }

} /* @media (min-width: 821px) */

/* @owner-less-white:start */
/* THE LEFT RAIL, LESS WHITE (the owner, 2026-10-06 morning: "there's room to take a little of the whiteness out of the left
   menu - make it like the right menu"). The SERVICES and EXPLORE plates take the right rail's cards' steel: the same face
   tones (#dddcda -> #d3d2d0 down the list, a calm field of 212 -> 202 under the words) and the cards' own shade - a soft
   darker metal at the left edge and the lower rim - so both rails read as one material. The words keep their ink. */
.side.left .menu.services .plate {
  --shade:
    linear-gradient(180deg, rgba(255,255,255,0) 2%, rgba(255,255,255,.18) 8%, rgba(255,255,255,.05) 13%, rgba(255,255,255,0) 17%) var(--fr),
    linear-gradient(180deg, rgba(0,0,0,0) 84%, rgba(0,0,0,.12) 100%) var(--fr),
    linear-gradient(90deg, rgba(0,0,0,.20) 0%, rgba(0,0,0,.09) 15%, rgba(0,0,0,0) 30%, rgba(0,0,0,0) 84%, rgba(255,255,255,.06) 100%) var(--fr);
}
.side.left .menu.services .plate:nth-child(1) { --t0: #dddcda; --t1: #cbcac8;
  --calm: linear-gradient(90deg, rgba(212,211,209,0) 16%, rgba(212,211,209,0.72) 22%, rgba(212,211,209,0.72) 91%, rgba(212,211,209,0) 96%) var(--fr); }
.side.left .menu.services .plate:nth-child(2) { --t0: #dcdbd9; --t1: #cac9c7;
  --calm: linear-gradient(90deg, rgba(211,210,208,0) 16%, rgba(211,210,208,0.72) 22%, rgba(211,210,208,0.72) 91%, rgba(211,210,208,0) 96%) var(--fr); }
.side.left .menu.services .plate:nth-child(3) { --t0: #dbdad8; --t1: #c9c8c6;
  --calm: linear-gradient(90deg, rgba(210,209,207,0) 16%, rgba(210,209,207,0.72) 22%, rgba(210,209,207,0.72) 91%, rgba(210,209,207,0) 96%) var(--fr); }
.side.left .menu.services .plate:nth-child(4) { --t0: #dad9d7; --t1: #c8c7c5;
  --calm: linear-gradient(90deg, rgba(209,208,206,0) 16%, rgba(209,208,206,0.72) 22%, rgba(209,208,206,0.72) 91%, rgba(209,208,206,0) 96%) var(--fr); }
.side.left .menu.services .plate:nth-child(5) { --t0: #d9d8d6; --t1: #c7c6c4;
  --calm: linear-gradient(90deg, rgba(208,207,205,0) 16%, rgba(208,207,205,0.72) 22%, rgba(208,207,205,0.72) 91%, rgba(208,207,205,0) 96%) var(--fr); }
.side.left .menu.services .plate:nth-child(6) { --t0: #d7d6d4; --t1: #c5c4c2;
  --calm: linear-gradient(90deg, rgba(206,205,203,0) 16%, rgba(206,205,203,0.72) 22%, rgba(206,205,203,0.72) 91%, rgba(206,205,203,0) 96%) var(--fr); }
.side.left .menu.services .plate:nth-child(7) { --t0: #d6d5d3; --t1: #c4c3c1;
  --calm: linear-gradient(90deg, rgba(205,204,202,0) 16%, rgba(205,204,202,0.72) 22%, rgba(205,204,202,0.72) 91%, rgba(205,204,202,0) 96%) var(--fr); }
.side.left .menu.services .plate:nth-child(8) { --t0: #d5d4d2; --t1: #c3c2c0;
  --calm: linear-gradient(90deg, rgba(204,203,201,0) 16%, rgba(204,203,201,0.72) 22%, rgba(204,203,201,0.72) 91%, rgba(204,203,201,0) 96%) var(--fr); }
.side.left .menu.services .plate:nth-child(9) { --t0: #d4d3d1; --t1: #c2c1bf;
  --calm: linear-gradient(90deg, rgba(203,202,200,0) 16%, rgba(203,202,200,0.72) 22%, rgba(203,202,200,0.72) 91%, rgba(203,202,200,0) 96%) var(--fr); }
.side.left .menu.services .plate:nth-child(10) { --t0: #d3d2d0; --t1: #c1c0be;
  --calm: linear-gradient(90deg, rgba(202,201,199,0) 16%, rgba(202,201,199,0.72) 22%, rgba(202,201,199,0.72) 91%, rgba(202,201,199,0) 96%) var(--fr); }
.side.left .menu.explore .plate:nth-child(1) { --t0: #d6d5d3; --t1: #c4c3c1;
  --calm: linear-gradient(90deg, rgba(205,204,202,0) 3%, rgba(205,204,202,0.8) 8%, rgba(205,204,202,0.8) 84%, rgba(205,204,202,0) 90%) var(--fr); }
.side.left .menu.explore .plate:nth-child(2) { --t0: #d5d4d2; --t1: #c3c2c0;
  --calm: linear-gradient(90deg, rgba(204,203,201,0) 3%, rgba(204,203,201,0.8) 8%, rgba(204,203,201,0.8) 84%, rgba(204,203,201,0) 90%) var(--fr); }
.side.left .menu.explore .plate:nth-child(3) { --t0: #d4d3d1; --t1: #c2c1bf;
  --calm: linear-gradient(90deg, rgba(202,201,199,0) 3%, rgba(202,201,199,0.8) 8%, rgba(202,201,199,0.8) 84%, rgba(202,201,199,0) 90%) var(--fr); }
.side.left .menu.explore .plate:nth-child(4) { --t0: #d2d1cf; --t1: #c0bfbd;
  --calm: linear-gradient(90deg, rgba(200,199,197,0) 3%, rgba(200,199,197,0.8) 8%, rgba(200,199,197,0.8) 84%, rgba(200,199,197,0) 90%) var(--fr); }
.side.left .menu.explore .plate:nth-child(5) { --t0: #d1d0ce; --t1: #bfbebc;
  --calm: linear-gradient(90deg, rgba(199,198,196,0) 3%, rgba(199,198,196,0.8) 8%, rgba(199,198,196,0.8) 84%, rgba(199,198,196,0) 90%) var(--fr); }
.side.left .menu.services .plate.is-current:nth-child(n), .side.left .menu.explore .plate.is-current:nth-child(n) { --calm: var(--mt-none); }
/* @owner-less-white:end */
/* @owner-ui-fix-20261012 (orchestrator, 2026-10-12; see check_20261007/ui_fix/p_ui_fix.py for the owner's words) */
/* 1. the home page prints in (and out) with its whole picture: the clip moves only its top edge, never cuts the sides */
.hero.printing.print-in-art .art { clip-path: inset(var(--shp-in) -1400px 0 -1400px); }
.hero.printing.print-out-art .art { clip-path: inset(var(--shp-out) -1400px 0 -1400px); }
/* 2. desktop: HOME at the top of the list, under SERVICES; the trays, titles and plates between move down the 52 px it frees */
.side.left .plate-dark.home { top: 46px; }
.side.left .recess-services, .side.left .menu.services, .side.left #lbl-explore, .side.left .recess-explore, .side.left .menu.explore,
.side.left > img.rivet-lg:nth-of-type(3) { translate: 0 52px; }
/*    the panel, with its details where their parts are now (the same layers as above, seven positions moved) */
.side.left {
  background:
    radial-gradient(ellipse 124px 24px at 152px 651px, rgba(255,255,255,.46) 0, rgba(255,255,255,.36) 50%, rgba(255,255,255,0) 100%),
    linear-gradient(90deg, rgba(0,0,0,.52) 0 1px, rgba(0,0,0,.36) 1px 2px, rgba(255,255,255,.30) 2px 3px, rgba(255,255,255,.08) 3px 4px) 100% 659px / 4px 110px no-repeat,
    linear-gradient(90deg, rgba(255,255,255,.34) 0 1px, rgba(255,255,255,.62) 1px 2px, rgba(0,0,0,.24) 2px 3px, rgba(0,0,0,.66) 3px 4px) 100% 0 / 4px 100% no-repeat,
    radial-gradient(ellipse 90px 120px at 100% 0, rgba(255,255,255,.30), rgba(255,255,255,0) 100%),
    linear-gradient(rgba(255,255,255,.14), rgba(255,255,255,.14)) 290px 46px / 12px 44px no-repeat,
    linear-gradient(180deg, rgba(0,0,0,.50) 0 692px, rgba(0,0,0,.30) 704px, rgba(0,0,0,.27) 752px, rgba(0,0,0,.14) 768px, rgba(0,0,0,.10) 872px) 288px 0 / 8px 100% no-repeat,
    linear-gradient(180deg, rgba(0,0,0,.26) 0 690px, rgba(0,0,0,.12) 704px, rgba(0,0,0,.10) 758px, rgba(0,0,0,.02) 782px, rgba(0,0,0,.02) 872px) 296px 0 / 5px 100% no-repeat,
    linear-gradient(180deg, rgba(0,0,0,.42) 0, rgba(0,0,0,.42) 70px, rgba(0,0,0,0) 100%) 288px 669px / 2px 95px no-repeat,
    linear-gradient(rgba(255,255,255,.42), rgba(255,255,255,.42)) 26px 97px / 256px 1px no-repeat,
    var(--blotch) 0 0 / 420px 420px,
    linear-gradient(to top right, rgba(0,0,0,.10), rgba(0,0,0,0) 45%),
    linear-gradient(90deg, rgba(0,0,0,.25) 0%, rgba(0,0,0,.18) 25%, rgba(0,0,0,.11) 60%, rgba(0,0,0,.03) 92%, rgba(0,0,0,0) 100%),
    linear-gradient(180deg, #dad8d4 0%, #d4d3cf 6%, #cbcac6 21%, #bdbbb8 35%, #b3b1ae 46%, #a8a7a4 54%, #a1a09d 67%, #9c9b98 79%, #9a9996 87%, #918f8c 98%, #8d8b89 100%);
  background-blend-mode: normal, normal, normal, normal, normal, normal, normal, normal, normal, multiply, normal, normal, normal;
}
/* 3. phone: the page list never repeats the page the chip above it names, Home included (owner, 2026-11-08; lma_top_1108) */
@media (max-width: 820px) {
  /* the home page's words start below the open column's foot (mobile.css: "the intro sits LEFT, below the open column's foot"):
     one row (33 px) shorter without Home, so the intro starts one row higher and stays as clear of the fold arrow as it was */
  .art { padding-top: 514px; }
}
/* @owner-ui-fix-20261012:end */
/* @owner-lma-mark-20261013 (orchestrator, 2026-10-13; check_20261007/lma_mark/p_lma_mark.py) the owner: "on the home page, somewhere at the bottom
   right, there must be a trace of LOUEI Metal Arts" - then "more minimal; now it looks forced in": the maker’s mark of a drawing, in
   the picture’s own callout style (the leader line, the label ink and type of .co): no plate, no shadow - printed on the paper */
.lma-mark { position: absolute; right: 30px; bottom: 24px; z-index: 4; display: flex; align-items: center; gap: 9px;
  padding: 1px 0 1px 11px; border-left: 1px solid #cabba7; text-decoration: none; color: #29231c;
  transition: color .2s ease, opacity .45s ease; }
.lma-mark img { display: block; width: 14px; height: auto; opacity: .72; transition: opacity .2s ease; }
.lma-mark-t b { display: block; font: 500 10.5px/1.3 var(--label); letter-spacing: .08em; text-transform: uppercase; color: inherit; white-space: nowrap; }
.lma-mark-t small { display: block; font: 400 10px/1.3 var(--label); letter-spacing: .04em; color: #8a5327; white-space: nowrap; }
.lma-mark-go { align-self: flex-end; margin: 0 0 3px -3px; color: #8a5327; opacity: .65; transition: opacity .2s ease; }
.lma-mark:hover { color: #8a5327; }
.lma-mark:hover img, .lma-mark:hover .lma-mark-go { opacity: 1; }
.lma-mark:focus-visible { outline: 2px solid #b87333; outline-offset: 4px; }
.has-view .lma-mark { visibility: hidden; }
.hero.printing .lma-mark { opacity: 0; transition: none; }
@media (max-width: 820px) {
  /* phone: on the right, under the intro */
  .lma-mark { position: relative; right: auto; bottom: auto; width: fit-content; margin: -6px var(--m-pad, 20px) 24px auto; }
}
/* @owner-lma-mark-20261013:end */
/* @owner-rename-3d-print-20261013 (orchestrator, 2026-10-13; check_20261007/rename/p_rename.py) the company is LOUEI 3D PRINT: the masthead's line
   under LOUEI reads 3D PRINT, one letter longer, so its tracking is set to span the same 140.2 px as the old seven-letter line did (measured) */
.topbar .logo .logo-sub:not(.is-page) { letter-spacing: .664em; }
/* @owner-rename-3d-print-20261013:end */
