What my sketch shows
Example, marked
1What it is for
It musthold a tablet upright while I tap the screen
It must nevertip over, or scratch the case
2Three views
Key: 1 slot, exactly this · 2 height, about this · 3 cable gap, about this · 4 base, your choice
3Every size, marked
| Size | My number | Mark |
|---|---|---|
| Slot | fits my case, measured 10 mm thick | exactly this |
| Height | about a phone’s length | about this |
| Base | none | your choice |
exactly this = must be this · about this = close is fine · your choice = the maker decides
4What it touches
It holds or touchesmy tablet in its case
- Ticked: Photo beside a ruler
- Ticked: cardboard stand-in
- Ticked: the tablet in the photo
5How many, what from
- Ticked: One
- a few
- more later
Material wishnot sure; must not scratch the case
6Before you share
- Asked in writing
- Ticked: kept confidential?
- Ticked: who owns the 3D model and files?
- Ticked: who else sees it?
- Planning a patent
- spoke to a registered patent agent
What my sketch shows · LOUEI 3D PRINT
Before you contact any shop
Have these ready. Any shop will ask for most of them.
- Photos: the whole part on plain paper, the same view with a ruler beside it, and the break up close.
- The sizes you can measure, and what the part fits onto or into.
- Where the part lives and what it does.
- How many you need.
- Any file or drawing you have, even an old one.
At LOUEI 3D PRINT you can start from anything: an idea, a sketch, a photo, CAD, measurements, the broken part itself or a previous order. We read STEP, STL, OBJ, IGES, DXF, PDF drawings and photographs.