Back to the guide

Before you scrap it

Example, marked

Machine, model, serialAir cleaner, copied from the rating plate

The partBlower wheel, number molded on the hub

  • It is
  • Ticked: broken
  • worn
  • missing

1Keep it and name it

  • Ticked: Kept every piece
  • Ticked: photographed every number
  • Ticked: not glued or cleaned

Numbers foundthree digits on the hub (photo 2)

2Ask the maker

  • Asked for
  • Ticked: stock
  • Ticked: a newer part number
  • Ticked: a drawing or size sheet

Their answerno stock, no drawing

3Look for a match

Best matchanother brand’s wheel: holes fit, bore does not

  • Checked
  • Ticked: holes
  • Ticked: shaft or bore
  • height
  • Ticked: turning direction

4Try a repair

  • Crack only
  • Ticked: piece missing
  • hole worn

If a repair does the job, stop here.

5Have a new one made

  • Ticked: Photos with a ruler
  • Ticked: sizes written down
  • Ticked: what it fits noted

Shops askedtwo, photos and sizes sent

6Fix or retire

QuestionMy answer
New machine coststoo much
A week without ita rented tool
A rung still open?yes, rung 5

Retiring it is a fair answer too.

Before you scrap it · LOUEI 3D PRINT

Before you contact any shop

Have these ready. Any shop will ask for most of them.

At LOUEI 3D PRINT you can start from anything: an idea, a sketch, a photo, CAD, measurements, the broken part itself or a previous order. We read STEP, STL, OBJ, IGES, DXF, PDF drawings and photographs.