One job, end to end
One broken part, start to finish.
Nothing here is an illustration: this part really came in.
The mesh is a real scan of it, with sizes measured off that scan. The printer runs the same print file this job would run for real.

Print · 01
We make a new one.
- Ready
Scroll
Scan
A part came in broken.
We scan it.
The part, as it is. Damage included.
You have a 3D file
Send the file. The check is free.
Before you pay, a person opens your file and checks it will print well.
We take STL, STEP, OBJ or IGES, and a photo or PDF helps. If you are not sure what you have, send it anyway.
- What the part is for
- How many you need
- Roughly how big it is
- Where it will be used: inside, outside, hot, cold, wet
These five things help us. Do not know some of them? Leave them out. We will ask.
You have a broken part, a sketch or an idea
No file? Start with what you have.
We make the model for you, and you say yes before we print anything.
We measure or 3D-scan your part, or work from one sentence about what it must do. If it broke for a reason, we tell you and fix that.
- You show usa photo, a sketch, measurements, or the part itself
- We build the modeland send it to you to look at
- You say yesthen we print it, check it and ship it
Check
We measure it, straight off the scan.
A mounting ear sheared off. Its bolt hole too.
You do not know which material is right
Plastic or resin?
If you are not sure, we choose for you.
We print two ways: plastic (FDM) builds with melted thread, layer by layer, and resin (SLA) hardens liquid with light. Most parts clearly suit one or the other.
| Plastic (FDM) | Resin (SLA) | |
|---|---|---|
| Best for | Parts that do a job — brackets, housings, jigs, replacement parts | Parts that must look perfect — models, masters, small detailed parts |
| How it looks | Fine lines from the layers; matte | Smooth, like a moulded part |
| How strong | Strong — PETG, ABS, ASA, Nylon, carbon-fibre | Rigid, but can crack. Good for models, not for heavy loads |
| How big | Large parts. Very large ones are printed in pieces and joined | Smaller parts. Larger ones are printed in pieces |
| Outside or hot | Yes — ASA, PETG and Nylon handle sun and heat | Keep it inside |
| Cost | Lower | Higher — worth it when detail matters |
| Not good for | Tiny details, small text, glass-smooth surfaces | Heavy loads, outdoor use, big parts |
We do not do SLS, MJF or metal printing here. If your part needs one of those, we tell you.
Which material
Tell us the job. We pick the material.
All we need is what the part must do and where it lives.
We choose, and we tell you why.
- It must be strongPETG or Nylon (FDM)Tough, with a little give. Takes screws and inserts.
- It lives outside or gets hotASA (FDM)Handles sun and heat. PETG for milder conditions.
- It must be stiff and lightCarbon-fibre (FDM)Rigid and stable. Jigs, fixtures, brackets.
- I just want to check the shapePLA (FDM)Fast, crisp, and cheap. The prototype material.
- It must look smooth and detailedResin (SLA)Models, masters for moulds, small precise parts.
- It gets knocked or hot, insideABS (FDM)The classic tough plastic for housings and covers.
Need something not listed here? Ask. If we do not have it, we say so and suggest the closest fit.
We make a new one.
First layer down.
Layer on layer, from the real print file.
You want to know the price
Five things decide the price.
You get the price and the plan together, before we print.
- Sizehow much material it uses, and how long it prints
- Materialengineering plastics and resins cost more than PLA
- How manythe setup is shared across a run
- Speedhow fast you need it
Nothing is made until you say yes.
You just want to read the facts first
The facts.
Everything is on this one page: no form, no call.
- We print in
- Plastic (FDM) and resin (SLA). Nothing else. If you need something else, we say so.
- Materials
- PLA · PETG · ABS · ASA · Nylon · carbon-fibre blends · resins
- Files
- STEP · STP · STL · OBJ · IGES · DXF · PDF · photos — or no file at all
- Size
- We confirm the size limit when we review your part. Large parts are printed in pieces and joined.
- Accuracy
- Made to your drawing. Tight spots are checked and priced per part.
- How many
- One part is fine. Short runs too. For hundreds, we may suggest moulding.
- First reply
- Free check. Price within one business day.
- Print time
- Told to you per part, before we start. We do not promise a blanket 24 hours.
- Checking
- Measured against your drawing before it ships.
- Your files
- Kept private. Confirmed in writing with your quote. NDA on request.
Ready
Off the plate.
Ready to go back to work.
After printing
Cleaned, checked, ready.
Your part arrives ready to use.
Every part leaves cleaned and checked against what you asked for.









