Every line has a purpose

LOUEIMetal Arts
A grey castle tower with a railed spiral staircase around a brick column rises from a round walled tray on a wooden table, a folded cloth beside it.

3D printed props and scale model parts from your reference

Yes. Props and scale model parts can be 3D printed in FDM or resin from reference pictures, a sketch or a CAD file. Say how close anyone will get; that decides the route. The review is free and a person replies within one business day.

Send reference pictures How close will it be seen?

A white model of a mid-rise building with balcony bands and dark shopfront windows sits on a grey street base inside a clear case on a white table.
White mid-rise building model in a clear display case

Can props and scale model parts be 3D printed from a reference?

Yes, and LOUEI 3D PRINT does the CAD design as part of the job, so you do not need a model ready. Resin suits fine detail and anything seen close or held; FDM filament suits broad shapes seen from further off. Several of one piece can also be cast from a silicone mould in resin, plaster or cement.

  • Prop pieces
  • Scale model detail parts
  • Masters, case by case

Where will your closest viewer be?

Everything else follows from that one spot.

  • Three vases, twisted terracotta, faceted sand and ribbed cream, stand on a wooden side table against a pale wall, the tallest holding dried grasses.
    Three vases in terracotta, sand and cream on a side table

    From across a room

    Outline and colour carry it. Say what it stands beside, and how big it is.

  • A blue-grey figurine of a seated terrier with a wiry coat, on an oval base, stands on a worn wooden side table beside a bright window.
    Blue-grey terrier figurine on a worn wooden table

    From arm's length

    Edges sharpen and small features start to count. Say the smallest detail that has to read.

  • Stacked blue rings held by binder clips surround a black funnel shape on a scuffed wooden bench, with pliers and screws nearby.
    Blue ring walls around a black funnel form

    From close up

    A lens finds what an eye walks past. Tell us the closest shot, not the average one.

  • An ivory rook and brown chess pieces, a king, a bishop and two pawns, stand on a wooden chessboard on a table in a dim room.
    Brown chess pieces and an ivory rook on a wooden board

    In the hand

    Fingers read what the eye forgives. Say how it will be held.

How much detail a 3D printed prop needs, by viewing distance

The nearer the viewer, the more of the surface counts: shape from across a room, small features and texture at arm's length, layer lines in a close shot or in the hand. Use the table with any shop, ours included. Send us your reference and we will say where it sits.

Detail by viewing distance, as a starting point.
Seen fromWhat gets noticedWill FDM layer lines show?Tell the shop
Across a room, in the backgroundOutline, silhouette, colourRarely a problemThe overall size, and what it stands beside
Arm's lengthSmall features and surface textureOften, on curved facesThe smallest detail that has to read
Filmed closeWhat an eye misses and a lens does notYes, on most surfacesThe closest shot, and the angle it is taken from
In the handTexture and edges, by touch as well as sightYes, and they can be feltHow it will be held

Across a room, FDM filament usually does it, and resin if the piece is small. From arm's length in, resin is the usual route.

How props are 3D printed: resin, filament or a silicone mould

We turn your reference into a 3D model and print it, with resin 3D printing for fine detail or FDM filament for broad shapes. A sketch or a few good photos can be enough to begin.

For several of one piece there are two routes: print each piece, or make silicone moulds and cast copies in resin, plaster or cement. Which fits depends on the piece and how many you need. How long a cast run takes depends on the size of the job.

Only at the idea stage? Start with how to turn a rough sketch into a prototype. To see the whole path first, read how we work from first message to production.

What to put in your first message

Pictures, the size and a line about the closest view will start it.

Send what you have: reference pictures from several sides, a sketch, a drawing or a CAD file. If all you have is the object, photograph it from several sides; shipping is arranged per project. We accept STEP, STL, OBJ, IGES, DXF, PDF drawings and photographs.

Then say what the piece is, and the overall size or what it sits beside. Add how many you need, the date if you have one, and whether that date can move.

Tell us the closest view

What reads at one size can vanish at another.

Detail parts for scale models

A railing that looks right at full size can be too thin to print at a smaller one. Say the scale and the overall size, and which details you would rather thicken and which you would rather lose.

One-off parts are normal work, so a single detail part is a fair request.

A cream relief of stepped contour mountains around a flat blue lake, set on a white mat in a light oak frame on a knotty pine wall.
Cream contour relief of a lake in a light oak frame

Resin masters for your own silicone mould

Tell us which silicone you use, because some resin surfaces can stop platinum-cure silicone from setting. Say where the mould splits and which faces need draft so the piece can come out.

Whether we print the master for your job is decided case by case, so raise it in your first message.

What you hear back after sending a reference

What comes back, in order.

  1. 1

    A person reads it

    We write back with what can be done or what is still missing.

  2. 2

    Questions, if any

    A reference rarely shows every side, so we ask for what we still need.

  3. 3

    Route and what sets the date

    Which process and material suit your closest view and your plans, and what decides the date.

  4. 4

    Price, before production

    You owe nothing unless you approve a plan and production begins.

Describe the piece

Describe the piece, not the script

Confidentiality and file ownership are agreed per project, in writing, on request. Ask before you send anything sensitive.

Until that is agreed, describe the piece, not the title or the script. Want to know who is reading it first? See who we are.

What we cannot make for a prop or model

We would rather you read this now than in a reply.

  • We print plastic only, in FDM and resin. We do not print metal here.
  • Steel goes to our sister company, LOUEI Metal Arts.
  • Some parts need a certification we do not hold, and we say so.

Written by the LOUEI 3D PRINT team. Last updated 9 November 2026.

Questions before you send a reference

Can you 3D print a scale model, or detail parts for one?

Yes, in resin or FDM filament. Thin railings and small lettering are the first things to vanish as the scale drops, so tell us the scale, the overall size and which details matter most.

Will print lines show up close?

It depends how close. Every print has layers. FDM layers usually show on curved faces even at arm's length, and a close lens can find layers on any print. Tell us the closest shot and we will say which process suits it.

What will the piece look like when it arrives?

That depends on the process and the material. Say in your first message how the piece will be used and how it has to look when you open the box, and we will tell you what we can and cannot do before anything is priced.

Can I get duplicates of a prop?

If the piece suits it, yes, through silicone moulds and cast copies in resin, plaster or cement. Say how many in your first message. If you only need one more of something you already have, start with copy or resize an object you already have.

How big can a 3D printed prop or model be?

Long thin pieces are harder than compact ones, whatever the size. Give us the overall size you need and the review will say whether we can make it.

Can you make my date?

It depends on the piece, so we do not give a date before we have read your message. Put your date in it, say whether it can move, and we will tell you what decides the timing. If it cannot move, keep a second option open until you hear from us.

Do you provide a certificate of insurance?

We cannot confirm one yet. If your production needs that paper before it can order, or pays a particular way, say so in your first message and we will tell you what we can and cannot confirm.

Do I need to own the design?

It helps. Send your own design, or one you hold the rights to. A piece carrying another company's logo or a known character is a separate conversation.

What does one piece cost?

Price depends on the part's function, the process, the material and the quantity, and it is confirmed before production. To work it out for your piece, we need the reference and the closest view.

A cream lens hood with a black interior and a thumbscrew split clamp fits a long telephoto lens on a worn black camera on a wooden table.
Cream lens hood on a long telephoto lens

Send the reference and the closest view

A few pictures, the overall size and one line about where the viewer stands are enough to begin.

Send reference pictures Ask a question first

Pictures, a sketch or a file · The closest view · Serving North America

Get a quote
LOUEI 3D PRINT

Get a quote

Tell us what you need — the review is free, and a person replies within one business day.

Opens your email app with everything filled in.