3D PrintingCNC Machining Coming SoonReverse EngineeringServing North America
We make it. We machine it. We rebuild it.
Send a sketch, a CAD file, or a photo of a broken part — free review, a reply within one business day, one part to production runs. Reverse engineering, 3D printing, metal fabrication — CNC coming soon.
The kinds of parts we print, shown where they work: on robot arms and boat trailers, in fire trucks and fridge doors, at the bench and on a knotty pine wall. Pick a kind from the index, or open any picture to see it whole.
LOUEI 3D PRINTContact sheet53 frames7 kindsFDM · resin · cast
The photographs
01Machines & labs
White fingers for an orange robot arm
02Jigs & shop aids
Red drill guide with one brass bushing
03Vehicles & boats
A marker light,lit amber at the launch ramp
04Replacement parts
Toothed collar at an old machine’s bearing
05Short runs & moulds
A printed master and the mould taken from it
06Home & building
Out in the weather,an orange cradle holds a sensor
07Vehicles & boats
A spinner knob for one-handed forklift turns
08Home & building
A wall holster for the charging plug
09Machines & labs
Green racks holding tubes on a lab shaker
10Jigs & shop aids
A white bracket for a ruby-tipped stylus
11Short runs & moulds
Ring-and-tube parts by the dozen,every one alike
12Home & building
Twin cradles for gas cylinders on a red cart
13Replacement parts
Knurled grey knob among the pilot lamps
14Vehicles & boats
A black surround framing a yellow fog lamp
15Display & models
Three vases:twisted, faceted, ribbed
16Jigs & shop aids
Blue fork fixture riding a shaft in the vise
17Replacement parts
The worn coupling and its grey twin
18Short runs & moulds
Five vented covers for a server’s empty bays
19Jigs & shop aids
Drill bit parked in one of four steel bushings
20Display & models
A castle dice tower with a spiral stair
21Vehicles & boats
A frosted lens for a weathered aircraft tail
22Replacement parts
Slotted drip grate,back under the mug
23Jigs & shop aids
Two orange blocks stand an aluminum plate on edge
24Machines & labs
A blue pocket for the machine’s mouse
25Vehicles & boats
On a truck’s pipe,a toothed guard over the drain
26Replacement parts
A red paddle back in the washer drum
27Jigs & shop aids
Railed plate and its L-bracket
28Display & models
A seated terrier,printed in blue-grey
29Vehicles & boats
Grip studs on a worn tractor pedal
30Replacement parts
A squirrel-cage blower wheel in its housing
31Vehicles & boats
Sun on the seats,and a grab handle at the corner
32Display & models
A fluted lamp shade,glowing at dusk
33Jigs & shop aids
The funnel sits snug in the drum’s bung
34Replacement parts
A grey door bin,jars and butter aboard
35Machines & labs
A polished rod in an orange block
36Vehicles & boats
A sailboat boom’s end cap,lines draped over
37Replacement parts
Round grille,slotted ring by ring
38Home & building
A hook that opens the door by forearm
39Short runs & moulds
Ring-tab caps in a heap,two strays beside it
40Display & models
A lake and its mountains in relief
41Replacement parts
Same splines:split metal, whole plastic
42Vehicles & boats
Pull here:the hose tray slides out of the fire truck
43Replacement parts
Red again:a new lens for the hazard switch
44Short runs & moulds
A tool drawer,sorted into printed bins
45Machines & labs
Bolted to the frame,a grey mount aims a blue sensor
46Replacement parts
A three-spoke hub keeps the wagon rolling
47Vehicles & boats
Classic truck, LED tail light,and the bezel between
48Home & building
A diverter sending downspout water to a barrel
49Display & models
Balconies and shopfronts under a clear acrylic case
50Vehicles & boats
Between the mast and the racks,a spinner knob
51Replacement parts
A grey tap on an old camper van’s sink
52Jigs & shop aids
A black nest holds a milled part under the spindle
Most projects arrive as something rougher than a finished drawing. Whatever you have is enough to open a conversation — a person reads it and works out the right way to build it, or tells you honestly if we are not the right supplier for it.
Both doors reach the same person, and the review is free — a human reads every project before any process, material, price or timeline is confirmed, within one business day. You owe nothing unless you approve a plan.
Know the process already? The services rail on the left goes straight to it. Recognise your goal? It is on the right.
Familiar situations
What usually happens, and what you end up with.
Seven ways projects usually arrive. They are patterns, not finished case studies — your own path is settled during review.
The cracked one in, the printed copy outDetail 02 · 3D scan
You bring a sketch or a description we may turn it into a design that can actually be made, then prototype it you get an approved part you can use or sell
You bring a model and your requirements we may review it for the chosen process and flag anything that will not build well you get the manufactured component
The right process is not the same at every quantity — a single replacement is not made the way a repeat order is.
A one-off replacement part
A functional prototype
Bridge production while tooling is decided
Repeat orders from an approved sample
Quantity, tooling and process are confirmed together during review, before anything is made.
Capabilities
The facts, for people who compare suppliers.
Have CAD and a deadline? This is your section. Everything below is how we actually run — and anything it does not answer, ask and you will get a straight answer in the first reply.
A spinner knob: one hand on the wheel, all shift long
How we work
Know what will happen before production begins.
Fit first, then the run: a fork fixture tried in the vise
A person reviews your project
Not a form and not an algorithm. Someone reads what you sent and decides how it should be approached.
Material and process are recommended, not assumed
If the material you asked for is wrong for the job, we will say so and explain what we would use instead.
Design feedback before anything is made
If a feature will not build well in the chosen process, you hear about it while it is still cheap to change.
You approve the plan first
Process, scope, price and timeline are agreed before production starts.
Ask about anything the project depends on
File confidentiality and NDAs, who keeps the CAD, how parts are checked, packaging, shipping and reordering — ask before you commit, and you will get a straight answer for your specific project.
Before you start?
Common questions.
Starting a project
Q.01Does it cost anything to ask?
No. The review and the quote are free — you owe nothing unless you approve a plan and production begins.
Q.02Do I need a CAD file?
No. A photo, a sketch, measurements or the physical part is enough to begin. If a model is needed to make your part, building one can be part of the job.
Q.03Can I start with a photo or a broken part?
Yes — that is one of the most common ways projects arrive. Send photographs from a few angles, and any measurements you already have.
Q.04Can you make a one-off replacement part?
Yes. Single parts are normal work here, not an exception.
Q.05What happens after I send my project?
It is read by a person, then you are contacted with questions or with a proposed plan — the process, the scope, what it will cost and how long it should take.
Q.06How is the manufacturing process selected?
By what the part must do. The same shape can be printed, cast or fabricated (CNC machining is coming soon), and the right answer depends on strength, accuracy, quantity, finish and cost together.
Q.07Can you help with material selection?
Yes. If you are not sure, describe how and where the part will be used and it will be recommended for you.
Q.08Can every old or broken part be reproduced?
No, and you will be told honestly when it cannot. Parts that are badly damaged, missing critical geometry, or subject to certification we do not hold may not be reproducible.
Files, pricing and delivery
Q.09Which file formats can I send?
Common CAD and mesh formats — STEP, STL, OBJ, IGES, DXF — plus PDF drawings and plain photographs. Send whatever you have; if something cannot be used as sent, you will be told what is needed instead.
Q.10How is pricing determined?
From the part itself: what it has to do, the process it needs, the material and the quantity. Price is confirmed with you before production, not generated automatically.
Q.11Can you produce repeat orders?
Yes. Once a part is approved, the project information is kept so a reorder does not start from scratch. The method that repeats best is chosen during review.
Q.12Where do you ship?
Shipping is arranged per project. Tell us where the finished work needs to go and it will be confirmed with your quote.
Q.13How are my files handled?
Ask before you send anything sensitive, and the handling and confidentiality terms for your project will be confirmed in writing.
Q.14Who owns the CAD produced for my project?
Ownership of files created for your project is agreed as part of the quote. Raise it up front and it will be confirmed before work begins.
You do not need to have everything figured out.
Two doors in. Both reach the same person — and the review is free.
Not sure what to call any of it? Describe the problem in your own words — what you have, what the result has to do, roughly how many, and where it is going. A person reads every message, and anything you do not know yet is settled during review.