
Broken part, no longer made? We can often print one from a photo.
Often, yes. 3D printed replacement parts can start from one photo of a broken, worn or discontinued plastic part, and you do not need a CAD file. One-off parts are normal work. The review is free and a person replies within one business day.

The small thing everything is waiting on
Can a broken part be 3D printed?
Yes, when enough of the shape can still be read. LOUEI 3D PRINT makes the replacement by FDM or resin 3D printing, working from your measurements or the part itself as well as photos, with CAD design as part of the job. Some parts cannot be reproduced; if yours is one, we say so.
- Clips and latches
- Covers and housings
- Machine knobs and handles
What are you starting with?
Pick the closest one.
What do I send to replace a broken part?
Send a photo of the part beside a ruler, one from the other side and one of where it sits. Phone photos are fine, and the first one is enough to start, ruler or no ruler.
- 1
A ruler beside the part
Lay a ruler against it and shoot straight on. Without a scale, a clip and a bracket look alike.
- 2
Both faces, then in place
One photo of each face, then one where it sits.
- 3
The pieces, unglued
Glue fills the break line, and the break line is how the old shape gets read.
- 4
The part it meets
What it sits against often still shows the shape the worn part lost. Mark which holes take which bolt.
- 5
What it does, how many, when
Say what it belongs to, what it does all day, how it failed, how many you need and any date you need it by.
Say the part is a drawer latch that snapped at the hook. Photo one: both pieces beside a ruler. Photo two: the empty slot. A note: holds the drawer shut, snapped at the hook, need one. That is a complete first message. A working part, just the wrong size, is a different question: the same object in another size.
What comes back after you send a photo
Price depends on the part's function, the process, the material and the quantity, and it is confirmed before production. The review is free, and you owe nothing unless you approve a plan. A person reads every project and writes back with what can be done or what is still needed before we can say. Here is how a project runs from first message to approval.
- Whether the part can be made, and what could stop it.
- Which process and material we would use.
- The price, for you to approve or not.
- What decides the time for your part.


Replace a broken plastic part that is no longer made
Start with what happened to the broken or discontinued part. The right row tells you what to send and what could stop the job, and we make the final call once we have seen it.
| What happened | What to send | Where it starts | What can stop it |
|---|---|---|---|
| Cracked, still in one piece | Photos beside a ruler, both faces, and in place | Photo or measurements, then CAD, then FDM or resin | A badly damaged shape |
| Snapped off, pieces saved | Photos of every piece, unglued, together and one by one | The pieces guide the CAD | Missing geometry at the break |
| Worn smooth | Photos of the worn part, and a matching one if it exists | The matching part first, then CAD | The old shape no longer readable |
| Gone completely | Photos of the empty spot and what it attached to | Measurements and the part it met | Too little left to read |
| Only sold inside a kit or unit | Photos of the unit, the piece and what it joins | One part, from photos or measurements | A shape hidden inside the unit |
| A steel part (LOUEI Metal Arts) | Photos and what the part does | Goes to LOUEI Metal Arts, our sister company | Not a plastic job |
Check whether the part is really discontinued
A part number can save you the whole job.
Manufacturers renumber parts, so look for a newer number in the parts list, on the manufacturer's site, or on the old part itself. If a new one is still sold, buying it is usually simpler than anything we can do.
Look in old manuals and parts diagrams too. Search public 3D model libraries for the make and part name: if someone has already drawn it, send us that file. Second-hand and salvage sellers are worth a look, but a used part can be as old and brittle as the one that broke.
Sometimes the plastic piece is only sold as part of a bigger kit or board, or it is no longer available at all. Then a single part made from yours is worth asking about.

No drawing or CAD file? CAD design is part of the job
You do not need one. Your photo starts it, and we say what else is needed.
Scan the part
For curved or awkward shapes a ruler cannot describe. It means sending the part itself, so wait until the reply asks for it.
Send your measurements
Often enough for a simple shape. Give the sizes that matter: hole spacing, wall thickness, the face that sits flush. Calipers help.
Which plastic should the new part be?
Tell us the job and we will say what we would use. FDM plastics like PETG, nylon or ASA are one route, resin for small, detailed parts the other.
- PLA, PETG, ABS, ASA Everyday FDM filaments Name the old plastic if you know it.
- Nylon, PC FDM filaments Say what the part does and what it touches.
- PETG-CF, PA-CF, other carbon-fibre blends FDM filaments with carbon fibre in them Ask about these if you know the old part used one.
- TPU A flexible FDM filament For a part meant to bend or grip, like a foot or a pad.
- Standard, tough (ABS-like), flexible, clear Resin, printed SLA or MSLA For small detail, or a part you need to see through.
Why did it break? Say so in your message
A copy of a part that failed can fail the same way. Say how it went: snapped at a corner, worn through, cracked at a screw hole. If the way it failed is a reason not to make it, we tell you.
When a broken part cannot be made again
We tell you when that is the case. If you are not sure, send the photos anyway.
- Badly damaged, missing geometry, certification we do not hold: any of these can stop a part.
- We print plastic only, in FDM and resin. We do not print metal here. If your part has to be steel, say so and we pass it to LOUEI Metal Arts.
Steel instead of plastic: LOUEI Metal Arts
We make 3D printed replacement parts in-house, in FDM or resin. Steel is the work of LOUEI Metal Arts, our sister company in metal fabrication: two companies, one team, one quote.
Written by the LOUEI 3D PRINT team. Last updated 9 November 2026.
Before you send a photo
Is a photo of the broken part enough to start?
Yes, to start, and the reply says what else is needed. A ruler gives scale, and two or three angles show the side one photo hides. If you cannot get a photo, describe the part instead.
Will you take a job for just one small clip?
Yes. One small clip is a whole job here. Send photos of it, and if the tabs are very small, add a close photo with a ruler so we can see whether they can be made.
Will the new part fit what I have?
We make no promise on fit, and a photo alone cannot settle it. Showing what the part meets helps most: which holes take which bolt, which face sits flush. Raise any doubt about fit before you approve a plan.
What does one replacement part cost?
Price depends on the part's function, the process, the material and the quantity, and it is confirmed before production. The review is free, and you owe nothing unless you approve a plan.
The machine is down. How long will this take?
We cannot give you a date on this page. Put the date you need it by in your first message, and say if a machine is stopped. The review tells you what decides the time for your part.
Where do I send it if it is my only one?
Nowhere yet. Start with photos and hang on to it. If we need the part itself, the reply says so, and shipping is arranged per project.
Who keeps the CAD file afterwards?
Confidentiality and file ownership are agreed per project, in writing, on request. Ask before you send anything sensitive, and say what you want done with the file.
I need several of the same part. What then?
Several of the same part has its own route. A mould is one way: we can make a silicone mould and cast copies in resin, plaster or cement.

Send a photo of what broke
You do not need to know what the part is called, so send the photo you can take today. Add what it belongs to, how many you need and any date.
Send a photo of the part Ask a question first
Free review · Start from a photo · Serving North America



