Every line has a purpose

LOUEIMetal Arts

First batch of printed parts? What the shop needs from you

First batch of 100 parts, and the shop’s first reply is a list of questions you can’t answer.

Short answer

What to send for a custom 3D printing quote is shorter than the shop’s list: what the part does, how many you need, which fits matter, and what you have today. Blanks are fine. At LOUEI 3D PRINT, a photo, a sketch or the part itself is enough to start, and a person reads every project and replies within one business day.

Go to the brief Send a photo of the part

LOUEI 3D PRINT team Updated November 12, 2026 9 min read

Two matching grey elbow shrouds sit over the four spindles of a small router, wooden cone-shaped pieces held in the collets below them, above a black slotted table on a blue base, with tape and offcuts on the wooden bench beside it.
Grey elbow shrouds on a four-spindle router, marked in white: 1 one shroud, 2 a second shroud of the same shape, 3 a wooden cone held in a collet below them.

The batch brief

This brief is for paper. Print it or copy it out, then fill it in with the part in front of you; nothing on this screen is sent anywhere. The marked entries are one invented example, a bearing block for a rail slide. Where you do not know, write “not sure”: a brief with blanks is still worth sending. It is the short version of how to order 3D printed parts without the trade words.

Print the brief (1 page)

  1. 1 Say what it does

    Write one line on the part’s job and where it lives: what it holds or carries, indoors or out, wet or dry, light load or heavy. A print farm’s guide to small-batch orders asks for exactly that, and accepts a description of the setting when you cannot name a material.

  2. 2 Say what you have

    Tick what is on your bench today: an idea, a sketch, photos, a file or the part itself. If there is a file, name the one version you want made and leave older copies out. Say whether it is in millimetres or inches: one lab’s checklist warns that a file read in the wrong units arrives far too big or too small.

  3. 3 Name the fits that matter

    List the two or three places where the part meets something else: a hole, a slot, the face it bolts to. For each, write what it meets and how you know its size: the mating part in hand, a measurement, or a photo with a ruler beside it.

  4. 4 Say how many

    Write the total, then how it splits: left-hand and right-hand versions, two lengths, spares. A plain “100” can hide two different parts. If the number may change, say so, and give the range you really expect.

  5. 5 One first, or all at once?

    Say whether you would like one part made and tried before the rest, or the whole batch at once. It is your preference, not a promise either way: the shop’s reply settles it. If you have no view yet, tick “not sure”.

The batch brief

Example, marked

The part, in your wordsa block that holds a bearing on an aluminum rail

1What it does

Job and placecarries a sliding plate, indoors, dry, light load

Material in mindnot sure

2What you have

  • Idea
  • sketch
  • Ticked: photos
  • Ticked: a file
  • Ticked: the part itself

Version to makeblock v3, the one that fit

3Fits that matter

FitMeetsHow I know
Bearing seatthe bearingbearing in hand
Rail slotthe railphoto with a ruler
Screw holesthe plate abovethe old block

4How many

Total100

Split50 left-hand, 50 right-hand

5One first, or all at once?

  • Ticked: One first, then the rest
  • all at once
  • not sure

Blank is fine: write “not sure”.

The batch brief · LOUEI 3D PRINT

What if you can’t answer the shop’s questions?

If you cannot answer a shop’s questions, send what you have and say which answers you do not know yet.

A blank is not a mark against you: the list is how a shop finds out what it still needs. LOUEI 3D PRINT starts from anything: an idea, a sketch, a photo, CAD, measurements, a broken part, a physical part or a previous order.

The questions a shop asks before a custom 3D printing quote, why each one is asked, and what to write when you do not know the answer yet.
The shop asksWhy it asksIf you are not sure
What the part doesThe job decides which process and material can work.Say in one line what it holds, rubs against or sits next to.
How manyThe number changes how the work is planned.Give a range in your own words, and say if it may change.
Which versionTwo versions of one file can make two different parts.Name the file or photo you mean, with its date.
Which fits matterThe part it mates with and the holes it meets decide whether it works.Name what it fits, and send a photo with a ruler beside the hole.
What you have todayThe starting point sets what the shop does first.Send what you have: a photo, a sketch, measurements or the part itself.

How many should you ask for if the number may change?

Ask for the number you are ready to order now, and give the range you expect if it may change.

That print farm’s guide warns against a plain “100 parts” when the order is really left-hand and right-hand versions plus spares: give each its own count, and if they must arrive packed apart, say so. It also keeps a forecast (“we may need more later”) apart from the number you actually release, so nobody plans around an order that never comes. Put them on two lines of the brief: the count you order now, then the forecast, marked “not an order”.

At LOUEI 3D PRINT, one-off parts are normal work, and repeat orders keep the project information. The price is worked out from the part: its function, the process, the material and the quantity. It is confirmed before production.

Which material should you ask for if you don’t know?

If you don’t know which material to ask for, describe the job and the place instead, and leave the choice open.

Say what the part holds, rubs against or sits next to; whether it lives indoors or outside, wet or dry, warm or cold; and whether it has to bend or stay stiff. Those answers narrow the choice more than a guessed name does.

LOUEI 3D PRINT prints in FDM and resin only. The filaments are PLA, PETG, ABS, ASA, Nylon, TPU, PC, PETG-CF, PA-CF and other carbon-fibre blends; the resins are standard, tough, flexible and clear. You can leave the choice open and ask about it in the free review.

Which fits does the shop need to know about?

A shop needs to know the two or three places where your part meets something else, and what each one meets.

Name the mating part, the hole and the slot, not every edge. The print farm’s guide says a check against the mating part is usually worth more than a tight number on every feature. One ordering platform’s help page says it may ask for the mating part itself, most of all when the fit is a custom thread.

Line drawing of a square bearing block from the end and from above, with its bearing seat, rail slot and four screw holes numbered.123FROM THE ENDFROM ABOVE
  1. Bearing seat: the hole the bearing presses into; send the bearing or its size.
  2. Rail slot: the opening that sits over the rail; photograph the rail’s end with a ruler.
  3. Screw holes: where the plate above bolts on; measure from the centre of one hole to the next.

Name these few; a shop can ask about the rest.

Ask which sizes can be held, rather than expecting every one to be exact. The same platform states that tolerances on 3D printed parts cannot be guaranteed, and that this depends partly on the material.

Should one part be checked before the rest are made?

Asking for one part to be made and tried by you before the rest is a choice you can raise with any shop; it is not a sign that you doubt the work.

If you ask, look at three things on that first part: does it fit the part it mates with, does it do its job, and is there anything you would change in the file before the others are made. Agree beforehand what “accepted” means for that part, and who says yes. Research on filament printing finds that a part’s shape can vary with the printer’s settings, which is why the check is worth making. The print farm’s guide adds a fair caution: a first part can prove fit and look, but it does not automatically prove that later parts, made in other runs or on other machines, will match it.

Whether a one-first step suits your batch is a question to settle with the shop before work starts, so do not assume it either way. Read more about printing a batch of the same part.

Before you contact any shop

Have these ready. Any shop will ask for most of them.

  • Photos: the whole part on plain paper, the same view with a ruler beside it, and the break up close.
  • The sizes you can measure, and what the part fits onto or into.
  • Where the part lives and what it does.
  • How many you need.
  • Any file or drawing you have, even an old one.

At LOUEI 3D PRINT you can start from anything: an idea, a sketch, a photo, CAD, measurements, the broken part itself or a previous order. We read STEP, STL, OBJ, IGES, DXF, PDF drawings and photographs.

When this is not a job for a shop

  • A print farm’s own small-batch guide says a part that is safety-critical, regulated or beyond what the process can do belongs with a qualified process and supplier, not a convenient print.
  • In Canada, the Motor Vehicle Safety Act sets standards for some vehicle equipment, so a batch of safety-critical vehicle parts is not a casual reprint.
  • A printed part carries no Canadian food-contact approval, so parts meant to touch food raise a question to settle before any are made.

Some parts cannot be reproduced: parts that are badly damaged, parts with missing geometry, and parts that need a certification we do not hold.

Written by the LOUEI 3D PRINT team. LOUEI 3D PRINT makes custom and replacement parts: 3D scanning and reverse engineering, FDM and resin 3D printing, molding and casting. Serving North America.

Back to the blog

Get a quote
LOUEI 3D PRINT

Get a quote

Tell us what you need — the review is free, and a person replies within one business day.

Opens your email app with everything filled in.