Broken part, no 3D printer: how to get just one made
Who do you even call about one little plastic part?
Short answer
To get a part 3D printed without a 3D printer, first answer one question: do you have a 3D file? With a file, try a library, a makerspace, an online printing service or a local print shop. With only the broken part, look for a shop or designer that makes the 3D model from it, and have the part, its pieces and photos with a ruler ready.

The who-to-call map
Five kinds of help can get one part made, and the first thing that sorts them is whether you already have a 3D model file.
You need no printer, no file and no 3D skills to ask for one part: the part and a few photos are enough to start. Start with the strip: pick what you have in your hands today. A 3D file is the shape a printer reads, often saved as STL or STEP. With a file, the first four rows are open to you. With only the part, its pieces or an idea, go to the last row, or ask a local print shop whether it also models.
Every route here works for someone: if you can make the model yourself, or someone has already shared a model of your part, a library or makerspace may be all you need.
Start with one question: what do you have?
| Route | What you bring | Who makes the 3D model | Usual limits |
|---|---|---|---|
| Library | A 3D file in a format it accepts, and often a card from that library system | You do; staff may help you prepare the file, and approve it | Varies by library: one plastic, caps on size and print time, a fee per print |
| Makerspace | A 3D file, and time to join and train | You do, then you run the shared printer yourself | Membership and training come first; rules vary by space |
| Online printing service | A 3D file you upload | You do, or a designer you hire | Quotes come from the file; you choose the material; whether a person checks it varies; shipping time |
| Local print shop | Your file or the part, and a shop near you | Ask: some shops only print, some also model | Skills and machines vary from shop to shop |
| Modelling shop or designer | Only the broken part, its pieces, photos with a ruler, the sizes that matter, or a sketch | They do, before anything is printed | Modelling is design work, often quoted on its own; a complex shape may need a scan |
What if you only have the broken part and no file?
If you only have the broken part and no file, the first job is modelling, not printing: someone has to turn the part into a 3D file before any printer can use it.
Library and makerspace printers give you a machine, not a model, and online printing services usually quote from a file you upload. So the route that fits is a person or shop that starts from the part itself, a few photos with a ruler beside it, or the sizes that matter.
Before you look for one, search the maker’s name and model number with “3D file” or “STL”: someone may already have modelled the same part and shared it. A shared file is someone else’s measurements, so check it against your part before anyone prints it.
Building the shape from photos of a broken part is design work, and one seller’s guide says it is quoted on top of the printing. A complex, curved shape may need a 3D scan rather than photos. Keep every piece of the old part, unglued: it is the pattern the model is made from.
A project at LOUEI 3D PRINT can begin with the broken part, a photo or measurements. Scanning and reverse engineering are part of the work too.
Can a library or makerspace print it for you?
Some libraries and makerspaces can print a part for you, if you bring a ready 3D file and follow their rules.
Libraries that offer printing often ask for a card from that library system, a file in a set format and staff approval, and they limit size, print time and the plastic used. Some charge a fee by weight; the amount is set by each library. Makerspaces usually expect you to join and train, then run the printer yourself.
Both suit someone who can make or find the model; neither will usually make it for you. Some library pages also point to free design software and classes, so a library can be where you learn to model the part yourself.
Rules differ from place to place, so read your own library’s or space’s page first.
Is it worth buying a 3D printer for one part?
A 3D printer is worth buying for one part only if you also want to learn to model and print, because the printer does not make the model for you.
One repair site’s article puts it plainly: good printed parts take more than a printer and a downloaded file. You need to know your materials, adjust the design over a few tries, and understand the limits of prints compared with cast or milled parts.
If that sounds like a hobby you want, a printer will make more than this one part. If you only want this part back, a shop or designer that models from the part skips that learning curve.
A printer is not a model
Will a shop make just one part?
Yes, some shops make a single part as normal work, so ask the question plainly in your first message.
To find shops near you, search “3D printing” or “reverse engineering” with your town’s name, or ask your library or makerspace who they send such jobs to.
At LOUEI 3D PRINT, one-off parts are normal work. If you already have a file, see one-off FDM or resin prints from your file. If you have only the part, you can start from a photo instead.
You do not need the trade words to ask. These five plain lines are a good start with any shop.
- What it is: in your own words, for example “a plastic paddle from inside a washer drum”.
- What you have: the part, any pieces, and photos with a ruler or coin in the frame.
- What it does: what it holds, carries or clips onto, and whether it gets wet or warm.
- How many: one is a fine answer.
- Your question: “Do you make the model from the part, or only print from a file?”
Before you contact any shop
Have these ready. Any shop will ask for most of them.
- Photos: the whole part on plain paper, the same view with a ruler beside it, and the break up close.
- The sizes you can measure, and what the part fits onto or into.
- Where the part lives and what it does.
- How many you need.
- Any file or drawing you have, even an old one.
At LOUEI 3D PRINT you can start from anything: an idea, a sketch, a photo, CAD, measurements, the broken part itself or a previous order. We read STEP, STL, OBJ, IGES, DXF, PDF drawings and photographs.
When this is not a job for a shop
- Gas and electrical work in BC is regulated: Technical Safety BC says only qualified individuals employed by licensed contractors can do it, with a permit route for some homeowners. A part on that side of an appliance belongs with them.
- No Canadian food-contact approval comes with a printed part that touches food, and one library’s printing page advises against printing anything for food or drink.
- If the part carries a load, holds heat or keeps someone safe, ask the shop first whether it can be made for that job.
Some parts cannot be reproduced: parts that are badly damaged, parts with missing geometry, and parts that need a certification we do not hold.
Written by the LOUEI 3D PRINT team. LOUEI 3D PRINT makes custom and replacement parts: 3D scanning and reverse engineering, FDM and resin 3D printing, molding and casting. Serving North America.